User's Manual
Table Of Contents
- General Description
- Features
- System Applications
- Block Diagram
- Pin Assignments
- Pin Descriptions
- CPU Access to Endpoint Data
- USB Request
- Get Descriptor-Device
- Get Descriptor-Device Qualifier (High Speed)
- Get Descriptor-Configuration
- Get Descriptor-String Index 0
- Get Descriptor-String Index 1
- Get Descriptor-String Index 2
- Get Descriptor-String Index 3
- Get Descriptor-String Index 4
- Get Descriptor-String Index 5
- Get Descriptor-Other Speed Configuration
- Set Address
- Set Interface 0
- Set Feature Device
- Clear Feature Device
- Set Config 0
- Set Config 1
- EEPROM (93C46 or 93C56) Contents
- USB Packet Buffering
- Functional Description
- Application Diagram
- Electrical Characteristics
- Mechanical Dimensions
- Ordering Information
Installation Description
This module is to be installed only by the professionals.
When IRF303JU/IRF303U2is installed in a product, we shall consider the following points;
1. Since RTL8187 miniCard owns its FCC ID Number/IC Number, we shall affix an exterior
label on the outside of the product if the FCC ID/IC Number is not visible. The exterior label
shall use wording such as either “Contains Transmitter Module FCC ID: TX2-RTL8187/IC
Number: 6317A-RTL8187”or “Contains FCC ID: TX2-RTL8187/ IC Number: 6317A-RTL8187”.
2. RTL8187 miniCard complies with requirements of sub-sections 15.203, 15.205, 15.207,
15.247 and 15.407 in FCC Rules Part 15. We shall installRTL8187 miniCard in accordance
with their requirements. RTL8187 miniCard complies with requirements of the sub-section
2.1091. When installers install RTL8187 miniCard into a product, they shall ensure that the
public is not exposedto radio frequency energy levels in excess of the Commission’s
guidelines in accordance with the sub-section 15.247(e)(i) and 15.407(f) in FCC Rules Part 15.