User's Manual

Pivot the card until you can snap it into place by pressing the upper side of the

connectors

(1)

, and secure the card with the two screws

(2)

. Connect the cables to the

new PCI Express Mini Card.

Note:

Be sure to attach the gray cable to the connector marked "MAIN" on the card,

and the black cable to the connector marked "AUX".

Note:

If the new PCI Express Mini Card has three connectors, as in the next

drawing, be sure to attach the gray cable to the connector marked "MAIN" on the card,

and the black cable to the connector marked "AUX". If you attach either cable to the

center connector, the connection speed will be lower.

10.

Put the memory slot cover back in place

(1)

, close the cover

(2)

, and then tighten the

screw

(3)

3/7 ページ(T400s) Installing and replacing a PCI Express Mini Card for wireless LAN/WiMAX ...

2009/03/02file://C:\TamaTemp\REPLPCI_sn1.HTM\REPLPCI_sn1.HTM