User's Manual

11.
Reinstall the battery
.
12.
Turn the computer over again. Connect the AC adapter and cables to the computer;
then turn it on.
Replacing a PCI Express Mini Card with three connectors
If your computer has a Multiple Input Multiple Output (MIMO) feature, a PCI Express Mini Card
that has three connectors comes with the computer. To replace the card for the MIMO feature, do
as follows:
1.
Turn off the computer; then disconnect the AC adapter and all cables from the
computer. Wait for a few minutes, till the inside of the computer cools, before you start
the following procedures.
2.
Close the computer display, and turn the computer over.
3.
Remove the battery
.
4.
Loosen the screw on the memory slot cover
(1)
, then remove the cover
(2)
.
5.
If a tool for removing connectors is included in the package with the new card, use it to
disconnect the cables from the card. If no such tool is included, disconnect the cables
by picking up the connectors with your fingers and gently unplugging them.
4/7 ページ(T400s) Installing and replacing a PCI Express Mini Card for wireless LAN/WiMAX ...
2009/03/02file://C:\TamaTemp\REPLPCI_sn1.HTM\REPLPCI_sn1.HTM