User's Manual

UM0023
2015-07-21 3
1. Introduction
This document illustrates how to build Realtek low power Wi-Fi software under IAR SDK
environment.
2. How to get IAR
IAR provides an IDE environment for code building, downloading, and debugging. Please check
“IAR Embedded Workbench” on http://www.iar.com/, and trail version is available. It requires IAR
version greater than v7.20 which supports CMSIS-DAP.
3. Debugger Setting
This board supports both CMSIS-DAP debugger and J-Link.
3.2 CMSIS-DAP
Ameba Device Board 2V0 supports CMSIS-DAP debugger. It requires installing “serial to USB driver”
at first. Serial to USB driver can be found in tools\serial_to_usb\mbedWinSerial_16466.
Connect board to the PC with micro-USB cable.