User's Manual

RTL8822CE
Datasheet
Single-Chip 802.11 ac/a/b/g/n 2T2R WLAN Controller
with PCI-E Interface
4
Track ID: Rev. 0.1
MAC Features
Frame aggregation for increased MAC
efficiency (A-MSDU, A-MPDU)
Low latency immediate Block
Acknowledgement (BA)
Long NAV for media reservation with
CF-End for NAV release
PHY-level spoofing to enhance legacy
compatibility
MIMO power saving mechanism
Channel management and co-existence
Multiple BSSID feature allows the
RTL8822CE to assume multiple MAC
identities when used as a wireless bridge
Transmit Opportunity (TXOP) Short
Inter-Frame Space (SIFS) bursting for higher
multimedia bandwidth
WiFi Direct supports wireless peer to peer
applications.
Other Features
Supports Wake-On-WLAN via Magic
Packet and Wake-up frame
Transmit Beamforming
Support S3/S4 AES/TKIP group key update
Support Network List Offload
CCA on secondary through RTS/CTS
handshake.
Support TCP/UDP/IP checksum offload
Peripheral Interfaces
Up to 15 General Purpose Input/Output pins
Two configurable LED pins
Generates 40MHz clock for peripheral chip.
Single external power source 3.3V only
PHY Features
IEEE 802.11ac MIMO OFDM
IEEE 802.11n MIMO OFDM
Two Transmit and Two Receive paths
5MHz / 10MHz / 20MHz / 40MHz / 80MHz
bandwidth transmission
Support 2.4Ghz and 5Ghz band channels
Short Guard Interval (400ns)
Sounding packet.
DSSS with DBPSK and DQPSK, CCK
modulation with long and short preamble
OFDM with BPSK, QPSK, 16QAM,
64QAM and 256QAM modulation.
Convolutional Coding Rate: 1/2, 2/3, 3/4,
and 5/6