User's Manual

RTL8822CE
Datasheet
Single-Chip 802.11 ac/a/b/g/n 2T2R WLAN Controller
with PCI-E Interface
11
Track ID: Rev. 0.1
Symbol
Type
Pin No
Description
RFI_WL5G_S0
I
18
WLAN 5G RF input for path S0 in external LNA/FEM configuration
5.5.
LED Interface
Table 5. LED Interface
Symbol
Type
Pin No
Description
BT_LED
O
65
BT LED Pin (Active Low)
WL_LED
O
66
WL LED Pin (Active Low), shared with GPIO8
5.6.
Power Management Handshake Interface
Table 6. Power Management Handshake Interface
Symbol
Type
Pin No
Description
WL_DIS#
I
27
Shared with GPIO9.This pin can be defined as the WLAN Radio-off
function with host interface remaining connected. When this pin is pulled
low, WLAN function will be Radio-off. When this function is not required,
external pull high is not required.
BT_DIS#
I
53
Shared with GPIO11. This pin can externally shut down the RTL8822CE
BT function when BT_DIS# is pulled Low. When this pin is pulled low,
USB interface will be also disabled. When this function is not required,
external pull high is not required.
HOST_WAKE_WL
O
29
Shared with GPIO12. The Host wakes up the WLAN controller in Remote
Wakeup Mode.
5.7.
Clock and Other Pins
Table 7. Clock and Other Pins
Symbol
Type
Pin No
Description
XI
I
22
40MHz OSC Input
40MHz crystal reference clock input
XO
O
23
40MHz Crystal reference clock output
SUS_CLK
I
67
External 32K or RTC clock input.
EESK
I
68
WLAN eFuse autoload
GPIO0
IO
69
General Purpose Input/Output Pin
GPIO1
IO
70
General Purpose Input/Output Pin
GPIO2
IO
71
General Purpose Input/Output Pin
GPIO3
IO
72
General Purpose Input/Output Pin
GPIO4
IO
73
General Purpose Input/Output Pin
GPIO5
IO
26
General Purpose Input/Output Pin
GPIO6
IO
28
General Purpose Input/Output Pin
GPIO7
IO
30
General Purpose Input/Output Pin