User's Manual

RTL8822C User’s Manual
The SAR test is according to KDB 616217 for test requirements.”
The maximum output power is reduced by software to perform SAR evaluation
as application.
This device meets all the other requirements specified in Part 15E, Section
15.407 of the FCC Rules.
Radiation Exposure Statement: (Portable)
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
The SAR evaluation is according to KDB 616217, and the module approach
distance restriction is 5 mm for notebook, 10 mm for tablet.
Radiation Exposure Statement: (Mobile)
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
This module is intended for OEM integrators only. Per FCC KDB 996369
D03 OEM Manual v01 guidance, the following conditions must be strictly
followed when using this certified module:
KDB 996369 D03 OEM Manual v01 rule sections:
2.2 List of applicable FCC rules
This module has been tested for compliance to FCC Part 15
2.3 Summarize the specific operational use conditions
The module is tested for standalone mobile RF exposure use condition. Any
other usage conditions such as co-location with other transmitter(s) or being
used in a portable condition will need a separate reassessment through a
class II permissive change application or new certification.
2.4 Limited module procedures