User's Guide

China environmental notices
China PC energy label
In accordance with “The Regulation of the Implementation on China Energy Label for Microcomputers”, this
microcomputer has an Energy Eiciency Label. The energy eiciency grade, TEC (Typical Energy
Consumption), and product category presented on the label are determined and calculated according to the
standard GB28380-2012.
1. Energy Eiciency Grades
The grade is determined by the standard with the calculation of base consumption level with the sum of
all the allowances for additional components such as main memory and graphics card. For products of
any grade, the TEC should not exceed the value specied in the following table:
Product Type TEC (kilowatt hour)
Grade 1 Grade 2 Grade 3
Desktop microcomputer, AIO Category A 98.0+∑Efa 148.0+∑Efa 198.0+∑Efa
Category B 125.0+∑Efa 175.0+∑Efa 225.0+∑Efa
Category C 159.0+∑Efa 209.0+∑Efa 259.0+∑Efa
Category D 184.0+∑Efa 234.0+∑Efa 284.0+∑Efa
Portable Computer Category A 20.0+∑Efa 35.0+∑Efa 45.0+∑Efa
Category B 26.0+∑Efa 45.0+∑Efa 65.0+∑Efa
Category C 54.5+∑Efa 75.0+∑Efa 123.5+∑Efa
NOTE: ∑Efa is the sum of power factor of product additional functions.
2. Typical Energy Consumption
The energy consumption gure presented on the label is the data measured with the representative
conguration that covers all the congurations in the registration unit which is selected according to
“The Regulation of the Implementation on China Energy Label for Microcomputers". Thus, actual energy
consumption of this specic microcomputer may not be the same as the TEC data presented in the label.
3. Product Category
The product category is determined by the standard according to the microcomputer’s conguration.
The categorization of products complies with the regulations in the following table:
Product Type
Conguration Description
Desktop microcomputer, AIO Portable Computer
26 Chapter 3 Environmental notices