User Manual

8
TOOLS REQUIRED:
ASSEMBLY
Your new ride-on toy has been assembled at the factory, but you will need to
connect the power supply.
WARNING: Children can be harmed by small parts, sharp edges and sharp points
in the ride-on toy's unassembled state, or by electrical items. In the unassembled state, this
package contains small parts. Adult assembly is required; children should not handle parts,
or help in assembly of the ride-on toy.
Phillips Screwdriver
(not included)
D
1. POWER SUPPLY CONNECTION
NOTE: The battery is disconnected for shipment to prevent the battery from
draining.
• Unscrew the screw on the seat with a screwdriver and remove the seat.
• Plug the power connector into the battery connector as shown, and replace the
seat, securing it with the screw removed in the first step.
Power
Connector
Battery
Connector