User's Guide

realwear.com
25
Using the HMT with a Hard Hat
To get hard hat clips, visit shop.realwear.com.
1. Hook the Hard Hat Clips into the HMT band and snap them into place.
2. Slide the clips into the hard hat accessory slots; the HMT band should sit
outside of the hard hat’s harness.
3. Put on the hard hat and if applicable, tighten until secure and comfortable.
4. To remove the HMT from the hard hat, pinch the clip fingers and push the clip out of the hard hat slots.
Using the HMT without a Hard Hat
Attaching the Rear Pad
The Rear Pad snaps onto the HMT’s rear band; align
the openings on the Rear Pad to the pegs on the
HMT’s rear band, and snap into place.
Attaching the Head Strap
Insert the end of the strap into the inside slot on both
sides of the HMT as shown. Fold the end back on itself
and secure using the Velcro patch.
Wearing HMT with Eye Protection
If you wear eye-glasses to operate a computer, or eye protection for your work, continue to wear the same glasses or
eye protection while using HMT. While HMT devices are designed to work well with or without eye-glasses or eye
protection, RealWear recommends wearing eye protection while using an HMT.