User's Guide

realwear.com
71
My Controls Continued
Action Button
The action button control, found in the My Controls menu, allows an HMT user to change the result of a single press of
the Action Button. By default the Action Button control is present in My Controls and set to Home Screen mode,
meaning that pressing the Action Button will return the user to the Home Screen. This has been the sole function of the
action button since the first release of the HMT-1.
Saying "ACTION BUTTON" while in My Controls will activate a selection for the HMT user. "HOMESCREEN" and "NOISE
CAPTURE" are the two options and the text below the ACTION BUTTON command shows the current setting. In the
example above, the current state is HOMESCREEN and the command "NOISE CAPTURE" may be selected.
When set to Noise Capture mode pressing the Action Button will alternatively disable or enable the noise cancellation
ability of the HMT, allowing external noise to be captured in video/audio transmission and recordings. A single press of
the Action Button enters Noise Capture mode (and disables noise cancellation); this displays a warning on the screen
while active and voice commands will not be recognized. Another single press of the button reinstates noise
cancellation and restores voice command ability. Voice commands are disabled because non-noise captured sound
will usually launch unwanted commands.
Voice Command
Action
“HOMESCREEN”
Sets the Action Button to go to the Home Screen when pressed
“NOISE CAPTURE”
Sets the Action Button to enable Noise Capture mode when pressed