Operating instructions

Center Armrest Monitor
3
Operating Instructions
Please read all safety and operating instructions
in this manual carefully, and keep this manual
for future reference.
Personal Safety
‧The back seat passenger must fasten the
seatbelt while operating this monitor.
‧Do not insert the USB while driving.
Failure to do so may result in personal
injury.
Temperature
Do not operate your unit in ambient temperature
above +60°C (+140°F) or below 0°C (+32°F).
Use a soft dry cloth for periodic cleaning of the
product. For more severe stains, please dampen the
cloth with water only. Anything else has the chance of
dissolving the paint or damaging the plastic.
Installation
‧Please inquire to your retailing shop to contact the
specialized engineer or technical staff for installation.
‧Be sure to comply with this manual while
connecting the cables. Failure to do so may result in
damage to the product.
‧Be sure the stability of the signal cable while installing.
Failure to do so may cause fire or electric shock due to
the wear of the signal cable.
‧Be sure to collect the cables well after installation.
Failure to do so may cause fire or electric shock.
Maintenance
If you have problems, do not attempt to repair the unit by
yourself. Doing so may result in personal injury or
damage to the product. Return it to your retailing shop for
repairing.
Characteristics of LCD Panel
‧After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to LCD
technology and is normal.
‧Under cold temperature conditions, the screen may
lose contrast temporarily. After a short warm-up period,
it will return to normal.
‧The LCD panel is manufactured using an extremely
high precision manufacturing technology. Its effective
pixel ratio is over 99.99%. This means that 0.01% of the
pixels could be either always ON or OFF.
Product Cleaning
PRECAUTIONS
Inserting & Ejecting Discs
‧Be sure to switch to DVD source before loading and
Unloading Discs.
‧Make sure the label side is facing you when you
insert the disc.
‧Press to eject any disc that is inserted incorrectly.
‧Do not attempt to insert a disc into the unit when the
unit power is off.
‧Your player accepts only one disc at a time for play-
back. Do not attempt to load more than one disc.
‧Playing a disc while driving on a very bumpy road
may result in skips, but this will not scratch the disc
or damage the player.
‧Do not grip or pull out the disc while it is being pulled
back into the player by the automatic reloading
mechanism.
‧As a protective measure to prevent the disc from
jamming, press to eject any disc with irregular
surface or inserted incorrectly.
Damage Discs
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
Irregular Shaped Discs
Be sure to use round shaped discs only for this unit
and never use any special shaped discs. Use of
special shaped discs may cause damage to the
mechanism.
‧Point the remote control at the remote sensors within 2
meters.
‧It may not be possible to operate the remote control if
the remote control sensor is exposed to direct sunlight
or interfere with objects.
Using Wireless Headphones (Option)
‧Keep the volume at a level where you can still hear
outside noise while driving. Failure to do so may result
in an accident.
‧If ACC or the monitor's power source is turned off, a
loud noise is produced though the headphones. Be
sure to remove the wireless headphones from your
ears before you turn the monitor off.
Using the remote control
ALCOHOL