User Manual

REAR VIEW SAFETY
14
Monitor Operation
M
EN
U
REV
V
1
/V2
▼
▼
POWER
ON / OFF
M
E
NU/
SEL
EC
T
I
ON
BUTTO
N
CAMERA
SELECTION
DOWN
ARROW
UP
ARROW
ROTATE
IMAGE
(Back/Exit
when in
Menu Mode)
• To turn on the monitor, press “POWER” button.
• To get to the menu, press “MENU” and use arrows to choose your settings
• To adjust brightness, press “MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness.
• To adjust contrast press “MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness
• To adjust saturationpress “MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness
• To adjust sharpnesspress “MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the brightness
• To adjust day/nightpress “MENU”. Use arrows to choose desired mode and press “MENU” to select.
Once selected, use arrows to change mode.
• To change the namepress “MENU”. Use arrows to choose desired camera and press “MENU” to select.
Once selected, use arrows to set the letters
• To adjust trigger sourcepress “MENU” to select. Once selected, use arrows to choose desired line and press
“MENU”.
• To adjust trigger delay press “MENU” to select. Once selected, use arrows to choose desired camera and press
“MENU”.
• To adjust distance grid press “MENU” to select. Once selected, use arrows to choose desired camera and press
“MENU”. Use arrows to set the distance.
• To adjust grid position press “MENU” to select. Once selected, use arrows to choose postion and press “MENU”.
• To set auto powerpress “MENU” to select. Once selected, use arrows to choose o or on and press “MENU”.
• To resetpress “MENU” to select. Once selected, use arrows to choose yes or no and press “MENU”.
• To return to previous press “REV” when in menu.
• To rotate screenpress “REV”.
• To adjust the volume press “UP” and “DOWN” buttons.