TM 1
What’s in the Box? • 2 Color CCD Infra-red Weather Proof Cameras • 1-7" TFT LCD Color Monitor wi/Universal Mount/Stand & Wire • 1-3 Channel Multiplexer Control Unit • 2-66’ Extension Cable for Cameras • Remote Control • 1 Power Connection Wire • 1 Double RCA + Power Converter (to connect external audio, video and power) • 1 Screw Kit for installation
Table of Contents Introduction...................................................................................4 Safety Information....................................................................5-7 Before Beginning Installation ......................................................8 Installation Guide..........................................................................9 Wiring Camera & Monitor ....................................................10-11 Installation Diagram ........................
Introduction Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. Congratulations on purchasing a Rear View Backup Camera System. With this manual you will be able to properly install and operate the unit. The Backup Camera System is intended to be installed as a supplement aid to your standard rear view mirror that already exists in your vehicle.
Safety Information Please read the entire manual and follow the instructions and warnings carefully. Failure to do so can cause serious damage and/or injury, including loss of life. Be sure to obey all applicable local traffic and motor vehicle regulations as it pertains to this product. Improper installation will void manufacturer’s warranty. USAGE • The Rear View Camera System is designed to help the driver safely detect people and/or objects helping to avoid damage or injury.
Safety Information INSTALLTION • Electric shock or product malfunction may occur if this product is installed incorrectly. • Use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction. • Take special care when cleaning the monitor. • Make sure to firmly affix the product before use. • If smoke or a burning smell is detected, disconnect the system immediately.
Safety Information If you have questions about this product, contact: Customer Service: Rear View Safety 1797 Atlantic Avenue Brooklyn, NY 11233 Tel: 1.800.764.1028 IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
Before Beginning Installation Before drilling please check that no cable or wiring is on the other side of the wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot or moving parts and electrical noisy components. We recommend doing a benchmark test before installation to insure that all components are working properly. Step 1: Choose the monitor and camera locations.
Installation Guide Camera 1. Attach camera bracket close to rear marker lights, centered on vehicle. 2. Attach camera to bracket using screws provided and adjust the angle. Cable 1. Be sure to position the cable properly. The aviation camera cable uses aircraft grade connectors which means the camera cable can be exposed to all weather elements, do not run the cable over sharp edges, do not kink the cable and keep away from HOT and rotating parts. 2. Fasten all cable and secure all excess cable. Monitor 1.
Wiring Camera & Monitor • When installing a ONE (1) camera setup, connect camera extension cable from the rear view camera to port # labeled “backup” (most systems port 3) Connect red 12V+ wire to ignition power source and black wire 12V- to chassis ground. Do not use white and yellow wires. • The blue wire is the REVERSE trigger wire. In typical rear-view installations, connecting this wire to the vehicle’s backup light circuit will activate the rear-view image whenever the vehicle shifts into reverse.
Wiring Camera & Monitor • Audio works on two ports of multiplexer and positive triggers must be triggered for audio to operate. #3 Port labeled “backup” (blue trigger) #2 port labeled “DVD” (white Trigger). • When installing a TWO (2) camera setup, use ports #3 and #2 and use positive triggers Blue and White. • There is a built-in voltage regulator for our systems which can handle 12-24 volts real consumption is 10 to 30 Volts.
Installation Diagram On Select Models 12 Figure 1.1 Figure 1.2 Figure 1.3 Figure 1.
Installing the Monitor 20m Extension Cable Video Out 1 2 3 4 5 Multiplexer Monitor 20m Extension Cable 3 Amp Fuse 1. DC12V-24V (red) 2. Ground (black) 3. Port #3 (blue) 4. Port #2 (white) 5.
Monitor Operation CAMERA SELECTION DOWN ARROW MENU/ SELECTION BUTTON UP ARROW POWER ON / OFF ROTATION IMAGER (Exit when in MENU mode) CAM ▼ ▼ MENU REV • To turn on the monitor, press “ON” button.
Splitting & Splicing Installing & Splitting Embedded Monitor Installing sun shield: Put shade cover on the display. Installing back cover: Put the monitor with shade cover in the back cover (only for embedded monitor) Splitting back cover: Hold monitor with 2 hands and detach with fingers, as indicated by arrows. (only for embedded monitor) Splitting sun shield: Take the monitor with the left hand and detach with right hand as indicated by the white arrow. (see below) Splicing 1. 2. 3. 4. 5. 1.
Positioning Rear Cameras Positioning 16 REAR VIEW SAFETY
Multiplexer Port #1 Reverse With Confidence™ Port #2 or DVD Port #3 Backup 17
Monitor Dimensions Some Models 7” Menu/ Power Selection Camera Down Up On/Off Button Selection Arrow Arrow Rotation Imager (Exit in Menu Mode) 5.
Monitor Specifications TFT LCD Digital Monitor Screen Size 7” Dot Resolution 800H x 3 (RGB) 480V Display Format 16:9 / 500:1 Display Brightness 400cd/m2 Viewing Angle U:50° / D:60° / R:70° Video Input 3 channel Video Source 1Vp-p, 75Ω Power Supply DC 12V-24V (+/- 10%) Power Consumption 5W Operating Temperature -30°C ~ +80° C Video System Auto NTSC/PAL Overall Dimensions 7”L x 5”H x 1”D Weight 400G Impact Rating 5G Dot Pitch 0.192H x 0.
Camera Dimensions Rear Camera 3” 3.
Camera Specifications Camera 1/4” Sharp® Color CCD Picture Elements 250,000 pixels Gamma Correction r=0.45 to 1.0 Image Sensor 480TV lines, PAL: 500H x 582V NTSC: 510H x 492V Lens 2.1mm View Angle 130° Sync System Internal Synchronization Infrared distance 50 Feet (18 Infrared IR) Usable Illumination 0 Lux (IR On) Power Source DC 12V-24V (+/- 10%) S/N Ratio More than 48dB Electronic Iris 1/50, 160-1/100,000sec Video Output 1Vp.
Troubleshooting Monitor Display Blue Screen & Displays No Signal • Verify that the blue positive trigger on power harness is put to power 12v+. If the problem still persists, verify that alternate ports work. If alternate ports do not work, remove Blue Trigger wire from 12V+ and select alternate channels. • Do a hard reset, unplug all cables and power cables from multiplexer (silver box) leave out for 1 minute and then re-connect them. • Check to ensure that the connection to the camera is tight.
Warranty One Year Warranty Rear View Safety Inc. warrants this product against material defects for a period of one year from date of purchase. We reserve the right to repair or replace any such defective unit at our sole discretion. Rear View Safety Inc. is not responsible for a defect in the system as a result of misuse, improper installation, damage or mis-handling of the electronic components. Rear View Safety Inc. is not responsible for consequential damages of any kind.
Disclaimer Rear View Safety and/or its affiliates does not guarantee or promise that the user of our systems will not be in/part of an accident or otherwise not collide with an object and/or person. Our systems are not a substitute for careful and cautious driving or for the consistent adherence to all applicable traffic laws and motor vehicle safety regulations. The Rear View Safety products are not a substitute for rearview mirrors or for any other motor vehicle equipment mandated by law.
Take Notes ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________
Take Notes ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________________________________________ ________
If you have any questions about this product, contact: Rear View Safety, Inc. 1797 Atlantic Avenue Brooklyn, NY 11233 800.764.1028 BETTER CAMERAS. BETTER SERVICE. IT’S OUR GUARANTEE.
