Specifications

Ruizhen Information Technology (Shenzhen) Co., Ltd RM-RF10TP-1278
1019
Marketing Department Contact Skill( Wang Aicheng):1381010367 Email: [e-mail]: Wang Aicheng
Location: A 1108, Xinghe WORLD A Building ,1 Yabao Road, Nankeng Community, Bantian Street, Longgang
District, Shenzhen
bit, no check bit.
Instruction
description
Instruction format
Examples of
instructions
Example Description
Response of test
modules
AT sent
Return: OK
AT sent
Return: OK
Send a response test instruction
to the module,
The module responded:
OK: module working normally
Type of
equipment
AT+MD0EL? sent
Return:+MD0EL: <Type>
OK
AT+MD0EL? sent
Return:+MD0EL: RZ-LORA-
V1.1
OK
Send to moduleType of
equipmentInstructions,
The module responded:
Type: Module Type
OK: query success
Get firmware
version number
AT+CGMR? sent
Return:+VERSION: <Ver.>
OK
AT+CGMR? sent
Return:+VERSION: 109
OK
Send to moduleGet firmware
version numberInstructions,
The module responded:
Ver: firmware version:1.09
OK: query success
Turn off echo
AT+NORESP sent
Return: No return
AT+NORESP sent
Return: No return
Send to moduleCancel echo
instructions，
The module will not respond
Open echo
AT+RESP sent
Return: OK
AT+RESP sent
Return: OK
Send to moduleTurn off the echo
command，
The module responded:
OK: echo open
Query whether
the device is in
firmware
upgrade mode
AT+UPDATE sent
Return: OK
AT+UPDATE sent
Return: OK
Send a query to the moduleIs the
device in firmware upgrade
modeInstructions,
The module responded:
OK: in upgrade mode
Module reset
(restart)
AT+RESET sent
Return: OK
AT+RESET sent
Return: OK
Send module reset (restart)
instructions to the module,
The module responded:
OK: reset successfully
Restoration of
factory settings
AT+DEFAULT sent
Return: OK
AT+DEFAULT sent
Return: OK
Send recovery factory setup
instructions to the module,
The module responded:
OK: recovery success
Query device
address
AT+ADDR? sent
Return:+ADDR: <Addr>
OK
AT+ADDR? sent
Return:+ADDR: B1,B2
OK
Send to moduleQuery device
addressInstructions,
The module responded:
Addr: address:45490
OK: query success
Configuration
Device Address
AT+ADDR=<Addr> sent
Return: OK
AT+ADDR=B1,B2 sent
Return: OK
Send the device address setting
instruction to the module and set
the address to:
Addr: address:45490
The module responded:
OK: set up successfully
Query wireless
rates and
AT+WLRATE? sent
Return:
AT+WLRATE? sent
Return:+WLRATE(0,7)
Send to moduleQuery wireless
rates and channelsInstructions,