Specifications

Ruizhen Information Technology (Shenzhen) Co., Ltd RM-RF10TP-1278
1119
Marketing Department Contact Skill( Wang Aicheng):1381010367 Email: [e-mail]: Wang Aicheng
Location: A 1108, Xinghe WORLD A Building ,1 Yabao Road, Nankeng Community, Bantian Street, Longgang
District, Shenzhen
channels
+WLRATE
(<Channel>,<Channel>Speed>)
OK
OK
The module responded:
Channel: channel:0(433 MHz)
Speed:7(1.8 Kbps)
Configure
wireless rates
and channels
Sending:
AT+WLRATE=<Channel>,<Speed>
Return: OK
Delivery: AT+WLRATE=0,7
Return: OK
Send to moduleConfigure
wireless rates and
channelsInstruction, willWireless
Rate and Channel SettingsTo:
Channel: channel:0(433 MHz)
Speed:7(1.8 Kbps)
The module responded:
OK: set up successfully
4.2.2 Instruction Parameter Description
Address: Addr: module address number, Hex code 2 bytes.
Set address:0000~65535:[0x00 0x00]~[0xFF 0xFF];
Among them [0x00 0x01] is factory default address ,[0xFF 0xFF] is broadcast default address,
do not recommend equipment use;
Rate: Speed: module communication air rate, Hex code 1 byte.
The following is the rate versus configuration value:
*Note:[0x07]: 1.8Kbps is the most stable rate to be tested under various long-term conditions
and is not recommended for modification.
Wireless rate
0.1 Kbps
0.14 Kbps
0.21 Kbps
0.3 Kbps
0.45 Kbps
0.6 Kbps
Configuration
values
0x00
0x01
0x02
0x03
0x04
0x05
Wireless rate
0.9 Kbps
1.8 Kbps
3.5 Kbps
7.0 Kbps
Configuration
values
0x06
0x07
0x08
0x09
Channel: Channel: module communication channel, Hex code 1 byte.
Set channels to:0~80:[0x00]~[0x80];
The different channel modules will automatically use different communication
frequencies:433 MHz~509 MHz;
Device type: Type: current device type, Ascii code.
Device type: RM-RF10TP-1278: lora transmission module.
Firmware version: Ver: firmware version of the current device, BCD code 2 bytes.
Example: firmware version:[00x01x09]: Represents the current firmware version 1.09
4.2.3 module factory default parameters
Project
Parameters
Value
Unit
Note
Module
00 01
1