User Manual

Volume Control

1. On the UBR-X200, the volume control only affects the analogue audio output. It does not apply

to digital audio output (HDMI, Coaxial and Optical) either in raw bitstream format or in PCM

format.

2. The VOL +/- buttons on the player’s remote control are provided as an alternative way of

controlling the audio volume. It is recommended that you use this control to make the audio

volume from the player the same as from other sources, such as TV programs or a VCR.

• Press the VOL – button to decrease the volume.

• Press the VOL + button to increase the volume.

Mute

1. Press the MUTE button on the remote control during content playback to turn off audio

output. The TV screen will display a mute icon.

2. Press the MUTE button again to resume audio output.

NOTE

• When there is no audio output, check for the presence of the "Mute" icon on the TV

screen. You can also press the MUTE button to check the mute mode status.

Audio Language

1. To select the audio language, press the AUDIO button on the remote control during playback.

2. Repeatedly press the AUDIO button or use the UP/DOWN ARROW buttons to choose from all

available languages.

Subtitle Selection

1. When playing a DVD, Blu-ray Disc or other video programs recorded with subtitles, press the

SUBTITLE button on the remote control to select the desired subtitle.

2. Repeatedly press the SUBTITLE button or use the UP/DOWN ARROW buttons to choose from

all available subtitles.

3. To turn off subtitles, select Off from the list.