Owner's Manual

ASSEMBLY INSTRUCTIONS
STEP 5: INSTALLING SHELVES
Screw the TOP POLE (C) into the
MIDDLE POLE (B).
The tops of the TOP POLES are
indicated by the BLACK END CAP.
STEP 6: INSTALLING TOP POLES
E (10) D (1)
On POLE (A+B), place 1 pair of SLIP
SLEEVES (E) at the desired distance
between SHELVES (E). Please make sure
the arrow faces up and that the word “TOP”
is right side up. Do this for each POLE
(A+B), and make sure that the heights are
identical for each POLE (A+B).
Lower SHELF (D) over the MIDDLE POLES
(B) so that the corner cylinders of the
SHELF (D) are positioned over the SLIP
SLEEVES (C).
Repeat Step 5 to install other SHELVES (D)
as desired.
**Use a rubber mallet, if needed, to secure
the SHELVES (D).
C (5)
4