Owner's Manual

5
ASSEMBLY INSTRUCTIONS
STEP 7: INSTALLING SHELVES
E (20) D (2)
On POLE (A+B+C), place 1 pair of SLIP
SLEEVES (E) at the desired distance between
shelves. Please make sure the arrow faces up
and that the word “TOP” is right side up. Do this
for each POLE (A+B+C), and make sure that
the heights are identical for each POLE
(A+B+C).
Lower SHELF (D) over the TOP POLES (C) so
that the corner cylinders of the SHELF (D) are
positioned over the SLIP SLEEVES (E).
Repeat Step 4 to install other SHELVES (D) as
desired.
**Use a rubber mallet, if needed, to secure the
SHELVES (D).