ASSEMBLY INSTRUCTIONS TWO DOOR WALL CABINET WHITE ESPRESSO ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item. Always use angle-braces or anchors to secure furniture to the wall.
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 50 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 50 POUNDS TOTAL WEIGHT. OVERLOADING WITH MORE THAN 25 POUNDS PER SHELF OR 50 POUNDS TOTAL WEIGHT MAY CAUSE THE SHELF TO FALL FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO PARTS QTY DESCRIPTION 1 1PC TOP BOARD 2 1PC LEFT SIDE PANEL 3 1PC RIGHT SIDE PANEL 4 1PC RIGHT DOOR 5 1PC LEFT DOOR 6 1PC REAR TOP BAR 7 1PC CROSS BAR 8 1PC SHELF 9 1PC BOTTOM BOARD
NO PARTS QTY DESCRIPTION 10 1PC LOWER BACK BOARD 11 1PC TOP BACK BOARD 12 1PC MIDDLE BACK BOARD A 10PC CAM BOLT B 10PC CAM LOCK C 18PC WOOD DOWEL D 4PC METAL HINGE E 1PC MAGNET F 2PC MAGNET PLATE
NO PARTS QTY DESCRIPTION G 2PC KNOB H 2PC MACHINE SCREW 4x20mm J 22PC WOOD SCREW 3x10mm K 2PC SCREW 3x14mm BACK BOARD SCREW M 24PC 2.
STEP 1 STEP 1 1. Screw 4 cam bolts (A) into pre-threaded holes on top board (1). 2. Insert 2 wood dowels (C) into dowel holes on top board (1). 3. Attach magnet (E) to top board by inserting 2 screws (K) through holes on magnet (E) and tighten to top board (1). STEP 2 STEP 2 1. Screw 3 cam bolts (A) into pre-threaded holes on left side panel (2). 2. Insert 7 wood dowels (C) into dowel holes on left side panel (2). 3.
STEP 3 STEP 3 1. Screw 3 cam bolts (A) into pre-threaded holes on right side panel (3). 2. Insert 7 wood dowels (C) into dowel holes on right side panel (3). 3. Attach 2 metal hinges (D) to right side panel (3) by inserting 6 wood screws (J) through holes on metal hinges (D) and tighten to right side panel (3). STEP 4 STEP 4 1. Insert one screw (J) through hole on magnet plate (F) and tighten to right door (4). 2.
STEP 5 STEP 5 1. Insert 2 wood dowels (C) into dowel holes on lower back board (10). STEP 6 STEP 6 1. Attach lower back board (10) to bottom board (9) by inserting wood dowels (C) to holes on bottom board (9).
STEP 7 STEP 7 1. Attach rear top bar (6), shelf (8), bottom board (9) and lower back board (10) to left side panel (2) by inserting cam bolts (A) into cam lock holes and inserting wood dowels (C) into dowel holes on rear top bar (6), shelf (8), bottom board (9) and lower back board (10). 2. Insert 3 cam locks (B) into cam lock holes on lower back board (10) and bottom board (9) and rotate cam locks (B) clockwise to secure cam bolts (A). STEP 8 STEP 8 1.
STEP 9 STEP 9 1. Attach top board (1) to assembled unit by inserting wood dowels (C) into dowel holes and inserting cam bolts (A) into cam lock holes on left and right side panel (2) and (3). 2. Insert 4 cam locks (B) into cam lock holes on left and right side panel (2) and (3) and rotate cam locks (B) clockwise to secure cam bolts (A). STEP 10 STEP 10 1.
STEP 11 STEP 11 1. Attach left door (5) to left side panel (2) by inserting 4 screws (J) through holes on hinge (D) and tighten to left door (5). 2. Repeat above step to assemble right door (4). STEP 12 STEP 12 1. Place drawing with hole positions on wall in desired position and drill 2 holes. 2. Insert 2 plastic anchors (O) into holes and attach cabinet in place by inserting 2 screws (N) through holes on back of cabinet and tighten cabinet to wall.
ENJOY YOUR NEW CABINET NOW! Attention Adults: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. Warning Please make sure your item is secured to the wall, per assembly instructions. Thank you for purchasing this item. We hope you enjoy it and consider purchasing other items.
INSTRUCCIONES DE ENSAMBLAJE GABINETE DE PARED DE DOS PUERTAS BLANCO CAFÉ ESPRESSO REQUIERE QUE UN ADULTO REALICE EL ENSAMBLAJE Este producto requiere que un adulto lleve a cabo el ensamblaje debido a las piezas pequeñas. Debe tener cuidado al desempacar y ensamblar este artículo para mantener las piezas pequeñas alejadas de los niños. ADVERTENCIA EN LA PÁGINA 2 VEA LA ADVERTENCIA COMPLETA Los niños pequeños pueden resultar gravemente heridos o muertos si el mueble vuelca.
ESTA UNIDAD DE REPISAS PUEDE GUARDAR HASTA 25 LIBRAS POR REPISA O UN TOTAL DE 50 LIBRAS. NO CARGUE CADA REPISA CON MÁS DE 25 LIBRAS O 50 LIBRAS DE PESO TOTAL. LA SOBRECARGA CON MÁS DE 25 LIBRAS POR REPISA O 50 LIBRAS DE PESO TOTAL PUEDE OCASIONAR QUE LA REPISA SE CAIGA DE LA PARED Y OCASIONE LESIONES GRAVES O INCLUSO LA MUERTE.
LISTA DE PIEZAS N.° PIEZAS CANT.
N.° PIEZAS CANT.
N.° G PIEZAS CANT. DESCRIPCIÓN 2 PIEZAS PERILLA 2 PIEZAS TORNILLO PARA METALES 4x20mm J 22 PIEZAS TORNILLO PARA MADERA 3x10mm K 2 PIEZAS TORNILLO 3x14mm M TORNILLO DEL TABLERO 24 PIEZAS POSTERIOR 2.
PASO 1 PASO 1 1. Atornille los 4 pernos de anclaje (A) en los agujeros previamente roscados del tablero superior (1). 2. Inserte los 2 pasadores de madera (C) en los agujeros para los pasadores del tablero superior (1). 3. Fije el imán (E) al tablero superior (1) al insertar 2 tornillos (K) a través de los agujeros en el imán (E) y apriete al tablero superior (1). PASO 2 PASO 2 1. Atornille los 3 pernos de anclaje (A) en los agujeros previamente roscados del panel izquierdo (2). 2.
PASO 3 PASO 3 1. Atornille los 3 pernos de anclaje (A) en los agujeros previamente roscados en el panel derecho (3). 2. Inserte 7 pasadores de madera (C) dentro de los agujeros de los pasadores en el panel derecho (3). 3. Fije las 2 bisagras de metal (D) al panel derecho (3) al insertar los 6 tornillos de madera (J) a través de los agujeros en las bisagras de metal (D) y apriete el panel derecho (3). PASO 4 PASO 4 1.
PASO 5 PASO 5 1. Inserte los 2 pasadores de madera (C) en los agujeros para los pasadores del tablero trasero inferior (10). PASO 6 PASO 6 1. Fije el tablero trasero inferior (10) al tablero inferior (9) insertando los pasadores de madera (C) en los agujeros del tablero inferior (9).
PASO 7 PASO 7 1. Fije la barra superior trasera (6), repisa (8), tablero inferior (9) y tablero trasero inferior (10) al panel del lado izquierdo (2) al insertar los pernos de anclaje (A) en los agujeros de bloqueo de anclaje e insertar los pasadores de madera (C) en los agujeros de pasadores en la barra superior trasera (6), repisa (8), tablero inferior (9) y tablero trasero inferior (10). 2.
PASO 9 PASO 9 1. Fije el tablero superior (1) en la unidad ensamblada al insertar los pasadores de madera (C) en los agujeros de pasador e inserte los pernos de anclaje (A) en los agujeros de pestillo de leva en el panel lateral izquierdo y derecho (2) y (3). 2. Inserte 4 pestillos de leva (B) en los agujeros de pestillo de leva en el panel lateral derecho y izquierdo (2) y (3) y gire los pestillos de leva (B) hacia la derecha para asegurar los pernos de anclaje (A). PASO 10 PASO 10 1.
PASO 11 PASO 11 1. Fije la puerta izquierda (5) al panel lateral izquierdo (2) al insertar los 4 tornillos (J) a través de los agujeros en la bisagra (D) y apriete a la puerta izquierda (5). 2. Repita los pasos anteriores para ensamblar la puerta derecha (4). PASO 12 Pared PASO 12 1. Coloque el dibujo con las posiciones de los agujeros sobre la pared en la posición deseada y perfore 2 agujeros. 2.
¡DISFRUTE DE SU NUEVO GABINETE AHORA! Atención adultos: Deben revisar el gabinete periódicamente para ver si hay tornillos/piezas dañadas o sueltas. Tomen una acción adecuada y necesaria para corregir los peligros, tal como apretar los tornillos y alejar cualquier pieza dañada de los niños. Advertencia Asegúrese de que su artículo esté fijo a la pared, según las instrucciones de ensamblaje. Gracias por comprar este artículo. Esperamos que lo disfrute y que considere comprar otros artículos.