Assembly Instructions

STEP 3

1. Screw 3 cam bolts (A) into the pre-threaded holes on the right side panel (3) by using a philips

screwdriver.

2. Insert 7 wood dowels (C) into the dowel holes on the right side panel (3).

3. Attach 2 metal hinges (D) to right side panel (3) by insert 6 wood screws (J) through the holes on

the metal hinges and tighten to right side panel (3).

STEP 4

1. Insert 1 screw (J) through hole on the magnet plate (F) then tighten to right door (4) by using a

philips screwdriver.

2. Attach knob (G) to the right door (4) by insert 1 screw (H) through the hole on right door (4) and

tighten to the knob (G).

3. Repeat above steps to assemble left door (5).