Specifications

ManualsBrandsRebrilliant ManualsBathroom Remodel & Bathroom FixturesShower Chair

Table Of Contents

ADA Compliant Folding Transfer Bench

■ Heavy Duty Type 304 Stainless Steel Wall

Brackets, Supports and Frame

■ Seat remains in raised position until you

pull it down

■ Low pressure spring action makes it easy to raise

and lower the seat

■ Rounded edges on seat battens for comfort and

safety

■ Seat battens are spaced to allow water to drain

through

Dimensions:

■ 18"L x 16"D (457.2 x 406.4mm)

Height Range: 17" to 19" (431.8 to 482.6mm)

Options:

■ Natural or oiled finish

■ Burmese Teak, Garapa, Plantation Teak, Cypress

or White Cedar seat

Installation & Load Bearing:

Under no circumstances should any shower seat be mounted to drywall, sheetrock, plas-

ter, fiberglass, acrylic or other similar "hollow" wall surfaces without appropriate wood or

steel backing material.

To Be Specified When Ordering:

Wood Species

Orientation ❏ Left ❏ Right

Finish ❏ Natural ❏ Oiled Finish*

Due to limitations in the printing process, actual colors may vary.

*Oiled Finish only applies to Burmese Teak & Plantation Teak

Burmese Teak Plantation Teak Garapa Cypress

14½"

Flange

Slide Box

17" to 19"

A.D.A. Max/Min

14"

4¼"

6¾"

1½"

16"

2½"

11½"

18"

3" Flanges

14½"

All shower seats must only be installed using suitable fasteners and sufficient in-wall backing

materials. ADA mounting height for lowered seat is 17" (432mm) to 19" (482mm). When

properly installed, all shower seats have been designed and manufactured to support

loads exceeding the downward pull requirements for Federal specifications FHA, VA,

HUD, hospital codes, and private construction. The actual "in use" load bearing

capacity of any shower seat, however, will be limited by the strength of its mounting sur-

face and installation hardware. The manufacturer recommends that shower seats be

installed using 2" minimum thickness "in wall" solid wood blocking material with #10 x 2"

stainless steel, phillips-head, sheet metal screws, or using a wall embedded,

minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine

screws.

Summary of content (8 pages)

PAGE 1
ADA Compliant Folding Transfer Bench ■ Heavy Duty Type 304 Stainless Steel Wall Brackets, Supports and Frame ■ Seat remains in raised position until you pull it down ■ Low pressure spring action makes it easy to raise and lower the seat ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through Dimensions: ■ 18"L x 16"D (457.2 x 406.4mm) 16" Height Range: 17" to 19" (431.8 to 482.
PAGE 2
ADA Compliant Folding Transfer Bench ■ Heavy Duty Type 304 Stainless Steel Wall Brackets, Supports and Frame ■ Seat remains in raised position until you pull it down ■ Low pressure spring action makes it easy to raise and lower the seat ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through Dimensions: ■ 32"L x 16"D (457.2 x 406.4mm) 16" Height Range: 17" to 19" (431.8 to 482.
PAGE 3
ADA Compliant Left and Right Hand Folding Transfer Bench Left Hand Transfer Bench Pictured ■ Heavy Duty Type 304 Stainless Steel Wall Brackets, Supports and Frame ■ Seat remains in raised position until you pull it down ■ Low pressure spring action makes it easy to raise and lower the seat ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through 32" Dimensions: ■ 32"W x 221⁄2"D (812.8 x 571.5mm) 13½" Height Range: 17" to 19" (431.8 to 482.
PAGE 4
ADA Compliant Folding Transfer Benchwith Legs ■ Heavy Duty Type 304 18 gauge Stainless Steel Wall Brackets, Supports and Frame ■ Seat remains in raised position until you pull it down ■ Low pressure spring action makes it easy to raise and lower the seat ■ Each leg is capped with a soft rubber Grip-Rite foot. ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through Dimensions: 18" ■ 18"L x 16"D (457.2 x 406.4mm) ■ 32"L x 16"D (812.8 x 406.
PAGE 5
ADA Compliant Folding Transfer Benchwith Legs ■ Heavy Duty Type 304 18 gauge Stainless Steel Wall Brackets, Supports and Frame ■ Seat remains in raised position until you pull it down ■ Low pressure spring action makes it easy to raise and lower the seat ■ Each leg is capped with a soft rubber Grip-Rite foot. ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through 32" Dimensions: ■ 18"L x 181⁄2"D (457.2 x 469.9mm) ■ 32"L x 221⁄2"D (812.8 x 571.
PAGE 6
Left & Right Hand ADA Compliant Folding Transfer Bench with Legs ■ Heavy Duty Type 304 18 gauge Stainless Steel Wall Brackets, Supports and Frame ■ Seat remains in raised position until you pull it down ■ Low pressure spring action makes it easy to raise and lower the seat ■ Each leg is capped with a soft rubber Grip-Rite foot. ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through Dimensions: 32" ■ 32"L x 221⁄2"D (812.8 x 571.
PAGE 7
Left & Right Hand ADA Compliant Folding Transfer Bench with Legs ■ Heavy Duty Type 304 18 gauge Stainless Steel Wall Brackets, Supports and Frame ■ Seat remains in raised position until you pull it down ■ Low pressure spring action makes it easy to raise and lower the seat ■ Each leg is capped with a soft rubber Grip-Rite foot. ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through 32" Dimensions: 131/2" ■ 32"L x 221⁄2"D (812.8 x 571.
PAGE 8
ADA Compliant Bathtub Bench ■ Adjustable clamps slip over the edge of the tub ■ Non-slip legs sit securely within the tub ■ Heavy Duty Type 304 18 gauge Stainless Steel Brackets, Supports and Frame ■ Low pressure spring action makes it easy to raise and lower the seat ■ Rounded edges on seat battens for comfort and safety ■ Seat battens are spaced to allow water to drain through Dimensions: ■ 26.5"L x 16"D (673.1 x 406.4mm) Height Range: 13" to 14.25" (330.2 to 361.