Installation & Assembly

Caution:This unit must be securely

attached to the wall using the included

hardware kit. See Step 11 and Step 14.

NOTICE “pointer

arrow” on face

of Cam (Part C)

Proper Pin (Part B) and Cam (Part C) Alignment:

Place the Cam so that the “pointer arrow” faces the edge of the panel. This allows for the Pin (Part B) to

be correctly aligned with the opening of the Cam.

Turn the Cam clockwise (normally about ½ turn. The Cam will capture the head of the Pin. As the Cam is

turned it will draw the two panels together.

See picture above and ﬁgures 3.1, 3.2, 3.3 for reference.

PAGE 1
Caution:This unit must be securely attached to the wall using the included hardware kit. See Step 11 and Step 14. NOTICE “pointer arrow” on face of Cam (Part C) Proper Pin (Part B) and Cam (Part C) Alignment: Place the Cam so that the “pointer arrow” faces the edge of the panel. This allows for the Pin (Part B) to be correctly aligned with the opening of the Cam. Turn the Cam clockwise (normally about ½ turn. The Cam will capture the head of the Pin.
PAGE 2
O O Q 8
PAGE 3
NOTE Proper Cam & Pin alignment (Parts B & C) 3.1 3.2 NOTE position of “pointer arrow” on Cam (Part C) points toward head of Pin (Part B) C 3.
PAGE 4
8 1 C 7 8
PAGE 5
9 10 G M M G G M G I K 11 G J 11 G G I M 12 K J 8 12
PAGE 6
11 12 8
PAGE 7
STEP 13 14.2 14.1 N 14.3 14.
PAGE 8
STEP 15 STEP 16 L 8 8