ASSEMBLY GUIDE Note: This instruction booklet contains important safety information, please read and keep for future reference.
CAM LOCK SYSTEM | (1) CORRECT WRONG 2) | Ensure starting position is correct, adjust cam bolt by pushing or pulling during assembly. Turn clockwise until secure.
ei, R4 R5 RAY CAM BOLT HAM {RAC Ol CF (AMERICA LOCKUPS ) 1. fasten 4 cam bolt R4 to base unit A. fasten left and right panel BL BR to base unit A, using 4 cam lock R5.
(ROAM BOLTHOLES 85730 (AMERICA LOCKUPS ® 2. easterner 4 cam bolt R4 to cover board C. ts)Fasten cover board C to left and fight panel BL&BR, using 4 gam lock RS.
(FLATIRON HEAD SCREW ST4.BX124PCE {(PLASTIC ESCAPADE &) 4 a)Put bottom door E in right position, then insert 2 plastic pad RY inch place and fasten them with 2 flat head screws bi Repeat above step for top door E. Homemaker sure the stopper on side pans! tan hold the swivel stile shelf, Make sure the hexagon bottom of plastic pad meets wall with the counterpart on left and right panel BLAB.
{R10} PLASTIC SCREW ANCHORMAN added safety feature & support strap R11 on cover board C has been provided. It must be attached to the wall using plastic screw anchor R10.
Care and Maintenance of your Furniture 1.Ensure metal plated hinges are kept dry to avoid rusting. 2.Please periodically check all fittings and re-tighten as necessary. 3.Wipe occasionally with a soft cloth slightly dampened with water. Then buff with a dry clean soft cloth. 4 Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to warp or finishes to DE-laminate.
