ASSEMBLY GUIDE Note: This instruction booklet contains important safety information, please read and keep for future reference.
3
(R16)PLASTIC VENT ø45-3PCS
1. Fasten 3 bar H to left panel BL and right panel BR using 6 flat head screw R15 (ST3.5X40) and 6 nut R13, then cover 6 plastic cap R14. H R13 R13 R15 Note:Please install R13 as shown on the photo with arrow face to the direction of R15 coming in to join with.
18 12 R2=6 3 3 3 R8=1 R7=1 E 4. a)Fasten the swivel shoe shelf R7＆ R8 to door E, using 6 flat head screw R2 (ST3.5X15). R3=4 R8 G E R7 6 b)Insert panel G into the slots of the swivel shoe shelf R7 ＆ R8 and fasten it using 4 flat head screw R3 (ST2.5X12).
12 3 R3=4 F 3 E panel c)Insert panel F into slots of the swivel shoe shelf R7 ＆ R8 and fasten it using 4 flat head panel screw R3(ST2.5X12). d)Fasten 1 door knob R6 to door E. e)Repeat above steps for another two doors.
5. a)Put bottom door E in right position, then insert 2 plastic pad R9 into place and fasten them with 2 flat head screws R1(ST4.5x12). b)Repeat above step for middle door and top door E.
R16 R16 R16=3 D (R16)PLASTIC VENT ø45-3PCS D D 6.a)Cross and combine plastic vent R16 with back panel D.
7
11
