Specifications
Guest Room
TECHNICAL DATA
MATERIALS: Holder - Stainless Steel
INSTALLATION: Position corner caddy on wall at desired location and mark hole locations with nail or punch. Mount holder
with 4 - #8 x 1-1/4" round head zinc plated steel screws provided.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, the following fasteners are suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
9-9/32"
235.5 mm
1-3/8"
35 mm
6-1/4"
159 mm
2-27/32"
72 mm
2-27/32"
72 mm
Designate proper finish sux
SPECIFICATION: Surface mounted large corner caddy shall be model ____________________________
(fill in model number)
Large Corner Caddy