Specifications
Guest Room
MATERIALS: Holder - Stainless Steel
INSTALLATION: Position corner caddy on wall at desired location and mark hole locations with nail or punch. Mount holder with 4 - #8 x 1-1/4"
round head zinc plated steel screws provided.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
TECHNICAL DATA
2-5/16"
59.5 mm
1-3/8"
35 mm
6-5/16"
160.5 mm
4-13/16"
123 mm
2-5/16"
59.5 mm
Designate proper finish sux
SPECIFICATION: Surface mounted small corner caddy shall be model ____________________________
(fill in model number)
SMALL CORNER CADDY