OWNER’S MANUAL 5-TIER NSF 36" x 18" x 72" WIRE SHELVING RACK w/WHEELS –CHROME
PARTS LIST Your 5-Tier NSF Wire Shelving Rack w/Wheels should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact our Customer Service You will need no additional tools for assembly.
ASSEMBLY INSTRUCTIONS STEP 1: Stationary Option Screw each FEET LEVELER (F) into the bottom of each BOTTOM POLE (A). Turn clockwise to screw in place. A (4) E (4) F (4) A (4) D (8) STEP 1: Mobile Option Screw each CASTER (E) into the bottom of each BOTTOM POLE (A). Turn clockwise to screw in place. Make sure the Locking Casters are on the same side. Use the provided caster wrench to tighten completely. Failure to do as instructed could result in the caster stem breaking.
ASSEMBLY INSTRUCTIONS STEP 3: INSTALLING BOTTOM SHELF Place SHELF (C) on its side and slide the (4) BOTTOM POLES (A) through the holes in the SHELF (C). Make sure that the SHELF (C) corner cylinders are positioned over the SLIP SLEEVES (D). C (1) Stand the unit upright. *Note: The level side of the SHELF (C) is the TOP side (the logo on the corner cylinders should be right-side up.) **Use a rubber mallet, if needed, to secure the SHELF (C).
ASSEMBLY INSTRUCTIONS STEP 5: INSTALLING TOP POLES Screw the TOP POLE (B) into the BOTTOM POLE (A). The tops of these poles are indicated by the BLACK END CAP. B (4) STEP 6: INSTALLING SHELVES On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at the desired distance between SHELVES (C). Please make sure the arrow faces up and that the word “TOP” is right side up. Do this for each POLE (A+B), and make sure that the heights are identical for each POLE (A+B).
ASSEMBLY INSTRUCTIONS STEP 7: INSTALLING SIDEBAR & HOOKS (OPTIONAL) Attach 2 pairs of SLIP SLEEVES (D) at the desired level on 2 POLES (A+B). Make sure that the heights are identical for both POLES (A+B). Slide in the SIDEBAR (G) so that the cylinders of the SIDEBAR (G) are positioned over the SLIP SLEEVES (D). Attach “S” HOOKS (H) either to the SIDEBAR (G) or anywhere else on the sides of any SHELF (C).
SERVICE PARTS LIST Customer Service provides the following replacement parts: Description 1) Shelf 7) Feet Leveler 2) Slip Sleeve 8) Wrench 3) Top Pole 9) Locking Caster 4) Pole Connector 10) S” Hook 5) Bottom Pole 11) Sidebar 6) Non-locking Caster 12) Endcap 12 1 2 11 3 10 4 5 9 8 6 7 6
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. Use the provided caster wrench to tighten casters completely. Failure to do as instructed could result in the caster stem breaking thereby causing the shelving rack to collapse. 3. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur.
PRODUCT REGISTRATION Thank you for purchasing a 5-Tier NSF Wire Shelving Rack w/Wheels. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form. Include a copy of your original receipt with your submission.
1 YEAR LIMITED WARRANTY 5-Tier NSF Wire Shelving Rack w/Wheels This warranty excludes normal wear and tear of the Product and its parts or components, and damage arising from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or alteration by any one other than this manufactuer. The warranty period of 1 year shall not be extended or renewed by the repair or replacement of, or compensation for, the Product.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service.
