Owner's Manual

ASSEMBLY INSTRUCTIONS

Screw the TOP POLE (B) into the

BOTTOM POLE (A). The tops of these

poles are indicated by the BLACK END

CAP.

STEP 5: INSTALLING TOP POLES

B (4)

STEP 6: INSTALLING SHELVES

On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at

the desired distance between SHELVES (C). Please

make sure the arrow faces up and that the word “TOP”

is right side up. Do this for each POLE (A+B), and make

sure that the heights are identical for each POLE (A+B).

Lower SHELF (C) over the TOP POLES (B) so that the

corner cylinders of the SHELF (C) are positioned over

the SLIP SLEEVES (D).

If SIDEBAR (G) placement is desired between

SHELVES (C), please skip to STEP 7 to complete the

SIDEBAR (G) installation before continuing

Repeat Step 6 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the

SHELVES (C).

D (24) C (3)