Assembly Instructions

A
B
A
s
s
e
m
b
l
e
S
i
d
e
P
o
s
t
s
A
s
s
e
m
b
l
e
B
o
t
t
o
m
S
i
d
e
P
a
n
e
l
s
Insert Dowels (Part i) and Cam Bolt (Part f) to
Side Posts (Part 10, Part 9, Part 12 and Part 11)
Insert Dowels (Part i) to Bottom Side
Panels (Part 7).
Helpful Hint:
Insert Cam Bolt
(Part f) into position.
See figure left.
A
s
s
e
m
b
l
e
t
h
e
M
a
g
n
e
t
a
n
d
B
o
t
t
o
m
S
i
d
e
F
r
a
m
e
(
B
o
t
t
o
m
U
n
i
t
)
.
T
i
g
h
t
e
n
C
a
m
L
o
c
k
s
.
- Attach magnet (Part n) to Front Left Side Post (Part 9) with Screws (Part e) as shown below Fig 1.
- Carefully align Cam Bolt with holes in edge of Bottom Side Panels (Part 7).
- Slowly push Side Posts and Side Panel together.
- For tightening Cam Lock (Part h), use the flat screwdriver.
- Repeat above steps and assemble another Bottom Side Frame.
- Cover Cam Lock with Stickers (Part r).
Helpful Hint:
Install Cam Locks
- Identify arrow on head.
- Arrow must point toward
hole in edge of panel.
- Push Cam Lock all the way
down into hole.
Helpful Hint:
Tightening Cam Locks
- Assure Cam Lock arrow
points to hole and push
Cam Bolt into hole.
- Use a Flathead Screw
driver to turn Cam Lock.
- Turn Cam Lock until
fully tightened (slightly
over half way around).
+
_
Fig 1.