Installation & Assembly

I
nstructions
Step 3: Build the Wine Wall
Step 4a: Mount the Wine Wall (drywall)
Disassemble provided toggle bolts, removing each ex-
panding nut. Insert the bolt through the mounting hole
on the wall bracket. With the wings of the expanding
bolt oriented toward the bolt head, thread the nut onto
the bolt until it begins to protrude from the nut by 1/2”.
Repeat for remaining mounting holes.
Close the wings of the expanding nuts and gently push
through the drywall whole until the wings open behind
the drywall. Repeat for all mounting points then tighten
the bolt using care to not over-tighten and to maintain
level for the unit.
Step 4b: Mount the Wine Wall (wood)
With the assembled Wine Wall held in final mounting
position. use provided wood screws to fasten the Wall
Brackets to the wall. Be sure to check the unit remains
plumb using a level.
Step 5: Add wine.
Only the good stuff.
Insert one Screw through the support fin on the Wall
Bracket. Thread one Rod onto the Screw and fully tighten
with provided 5mm allen key. Repeat for all support fins
on both Wall Brackets.