Buying Guides

What are the general installation guidelines?
Standard wine bottles [750ml] average 12 inches in length. For
this size bottle VintageView® wine racks are mounted at 7 1/2"
apart per upright (starting a minimum of 2 3/4" distance from
your first perpendicular wall) and 5 1/2" between sets of wine
racks. Therefore each wine rack requires approximately 13" of
space, side to side, for installation with standard bottles. All wine
bottles vary in size, so be sure to confirm your bottle
measurements before installing your VintageView® wine racks.
How far out from the wall do VintageView® wine racks
extend?
The 1 bottle deep wine racks extend out 5 1/4" from the wall.
The 2 bottle deep wine racks extend 8 1/2 " from the wall and
the 3 bottle deep wine racks extend out 12" from the wall.
(Please see our product specifications
)
How does the cost compare to other wine racks?
Pricing for wine racks can range from as little as $1.00 per bottle
up to over $20.00 per bottle, depending on whether you
purchase a kit or have the wine racks custom built. Our wine
racks range in price from $2.28 to $6.89 per bottle. Our wine
racks are easier to install than other wine racks which cuts down
on installation costs and our wine racks are the only wine racks
on the market that can fit into a very shallow wine storage space
as well as display the bottle labels rather than the corks.
How much will shipping cost?
Shipping costs vary depending on the number and type of wine
racks purchased as well as the destination of your order. See our
order form for details on shipping costs by quantity and location.
How many VintageView® wine racks can I fit in my space?
Measure the length of your storage wall, in inches, and divide by
13. Take the resulting number and drop any decimals. This is the
number of VintageView® WS series wine racks you can fit on
your wall using standard spacing. If you are stacking
VintageView® wine racks you will need to multiply the number of
columns by the number of wine racks high you will be stacking
(double stack = multiply by two, triple stack = multiply by three,
etc.) For example, if your wine storage wall is 10 feet (120
inches) in length you would divide 120 by 13, which equals 9.23;
dropping the decimal, gives you 9. Therefore, you can fit 9 wine
racks from one side of your wine storage space to the other. If
you have 13 foot ceilings, you could triple stack our 3 foot
VintageView® wine racks (9 racks across multiplied by 3 racks
high=27 wine racks total). Remember that our wine racks are
designed to be cut so you can generally fit them into any height
space. Please call us
toll-free at 1-866-650-1500 for help in determining the
appropriate quantity, size and model of
VintageView® wine racks to use in your desired wine storage
area.