Frequently Asked Questions

ManualsBrandsRebrilliant ManualsBar & WineIndurial 12 Bottle Wall Mounted Wine Bottle Rack

What color are the wine racks? wine racks come standard

in two finishes: Wine Bottle Green

and Brushed Nickel (Platinum Series)

Can I store as many wine bottles with wine racks as with

traditional wine racks?

Your space configurations and the wine racks you use will

determine the wine storage capacity of your wine display.

Generally, our 3 bottle deep wine racks will hold the same

quantity of bottles as standard cork-forward racks...9 bottles per

square foot. If you interlace

our 3 bottle wine racks (call for

details) you can increase your wine storage capacity to as much

as 10 1/2 bottles per square foot. Also, with wine racks you will

have much less wasted space in your corners.

Is installation difficult with wine racks?Our wine racks are

simple to install using a standard level, a wine bottle and a

screwdriver. With some mounting surfaces you may also need a

drill. All of our wine racks come with detailed installation

instructions. wine racks can be installed into drywall, rock, brick,

wood or just about any other surface. A fully loaded wine rack

can be safely installed on a drywall surface with the correct

fasteners. We now carry fastener packets you may order for use

with certain surfaces. Typical fasteners used to install wine racks

include toggles, spiral inserts and Tapcon screws.

We sell fastener kits for drywall and masonry walls.

The following are our fastener recommendations:

There are six pre-

drilled mounting holes for fasteners on each set

of wine racks, three holes per side -

neck and base. Each fastener

must support less then twenty pounds, of which most is in shear

force (vertical pressure down on the wall). The top fastener has

the most pull out force (horizontal pressure away from the wall).

When installing wall strips ALWAYS make sure the top fastener is

solid.

Installation surfaces and suggested fasteners

Wood: #8 x 2" wood screw

Plywood on drywall: #8 x 2" wood screw

Drywall*: Spiral insert, Toggle bolt or Molly Concrete:

3/16" x 1 3/4" masonry screw (ie: Tapcon) Stucco on

concrete: 3/16" x 1 3/4" masonry screw (ie: Tapcon)

Many people are concerned about mounting wine

racks onto drywall with only spiral inserts. If you are concerned

about this we suggest using a Toggle bolt or Molly on the top

mounting holes and spiral inserts on the bottom two mounting

holes.

Summary of content (2 pages)

PAGE 1
What color are the wine racks? wine racks come standard in two finishes: Wine Bottle Green and Brushed Nickel (Platinum Series) Can I store as many wine bottles with wine racks as with traditional wine racks? Your space configurations and the wine racks you use will determine the wine storage capacity of your wine display. Generally, our 3 bottle deep wine racks will hold the same quantity of bottles as standard cork-forward racks...9 bottles per square foot.
PAGE 2
What are the general installation guidelines? Standard wine bottles [750ml] average 12 inches in length. For this size bottle wine racks are mounted at 7 1/2" apart per upright (starting a minimum of 2 3/4" distance from your first perpendicular wall) and 5 1/2" between sets of wine racks. Therefore each wine rack requires approximately 13" of space, side to side, for installation with standard bottles.