Assembly Instructions

6
INSERT DRAWERS AND COMPLETE ASSEMBLY
• THE DRAWER SIDES (PART 8) HAVE A CHANNEL
THROUGH THE MIDDLE OF THE PART. THIS CHANNEL
SLIDES OVER THE DRAWER RUNNERS (PART D).
• SLIDE ALL DRAWERS IN.
AND CHECK THE DRAWERS RUN SMOOTH.
ONE DRAWER FRONT SHOULD NOT OVERLAP ANOTHER
DRAWER FRONT EDGE.
IF THERE IS A PROBLEM, IT IS LIKELY THE DRAWER FRONT IS NOT
ASSEMBLED LEVEL. SIMPLY BACK OUT ONE SET OF THE SCREWS
ON A DRAWER SIDE (PART 8) AND ADJUST UNTIL IT IS TO YOUR
SATISFACTION.
(REMEMBER TO LINE THE BOTTOM EDGES OF THE DRAWER SIDE
(PART 8) AND DRAWER FRONT (PART 11) UP.)
• STEP BACK TO LOOK AT THE UNIT. YOU MAY PREFER TO
MOVE ONE DRAWER TO ANOTHER´S POSITION.
USE AND CARE INSTRUCTIONS:
CARE INSTRUCTIONS:
• NORMAL USE: WIPE WITH A CLEAN CLOTH.
• OR WHEN NEEDED TO CLEAN SCUFFS:WIPE CLEAN WITH A SLIGHTLY DAMP CLOTH AND A MILD CLEANER. THEN
WIPE DRY WITH A CLEAN CLOTH.
USE:
MULTI-PURPOSE MOBILE STORAGE UNIT FOR HOME, OFFICE, CRAFT ROOM, KITCHEN, OR GARAGE.
NOTICE: 7+(:5,77(1 ,16758&7,216
CONTAINED +(5(,1$5( &23<5,*+7('
7-07
COMPLETED ASSEMBLY:
THANK YOU FOR YOUR PURCHASE, AND WELCOME !