Installation & Assembly

Table Of Contents

Assembly Instruction

WARNING:

>This unit has been designed to support the

maximum loads shown. Exceeding these

load limits could cause sagging, instability,

product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

Fix Top Cap (2) on top of the Shelf

Panel(A),as shown.

STEP 2

Recommended Maximum Weight

4-Tier Multipurpose

Shelf Display Rack

23.6”(W) x 43.3”(H) x 11.6”(D)DIMENSION :

*Unit in Pound(lbs)

If necessary,please follow instruction

below to prevent product tip over.

STEP 3

CABLE

TIE

WALL

1 SET

WALL PLUG

1/4’’

DRILL BIT

HARDWARE PARTS LIST QTY

WALL PLUG EYELET SCREW

CABLE TIE

EYELET SCREW

No Tools Required

Recomm. 1 Person

Approx. 15 minutes

PAGE 1
STEP 2 STEP 3 Fix Top Cap (2) on top of the Shelf Panel(A),as shown. If necessary,please follow instruction below to prevent product tip over. HARDWARE PARTS LIST QTY Assembly Instruction 1 SET A WALL PLUG EYELET SCREW CABLE TIE WALL PLUG EYELET SCREW Shelf Display Rack 1/4’’ DRILL BIT DIMENSION : WALL Approx. 15 minutes 1 WALL CABLE TIE Recomm. 1 Person Recommended Maximum Weight No Tools Required 15 WARNING: 15 >This unit has been designed to support the maximum loads shown.
PAGE 2
No Hardware List Qty 1 Long Pole 12pcs 2 Top Cap 4pcs 3 Round Leg 4pcs No A Parts List Shelf Panel Qty 4pcs STEP 1 1.1 1.2 Attach Round Leg(3)to the bottom of Shelf Panel(A). Attach Long Pole(1)and Shelf Panel(A)as shown. 2 A 1 A A A A A 3 USEFUL HINTS BEFORE YOU START: 1. Read each step carefully before starting. 2. It is important that each step is performed in correct order to avoid difficulties. 3. Identify, sort and count the parts before assembly. 4.