Owner Manual

You will need a Phillips screwdriver for assembly. A rubber mallet is also recommended.
Note: There are two options for installation:
1) In cabinet – go to page 2-3
2) On wire rack – go to page 4-6
PARTS LIST
LOWER DRAWER (1)
A
LEFT SLIDE (1)
B
RIGHT SLIDE (1)
C
D
F
UPPER DRAWER (1)
PLATE
SCREW (4)
G
CABINET
SCREW (4)
H
CABINET MOUNTING
TEMPLATE (1)
I
CONNECTOR (2)
RACK PLATE (4)
E
1
Used when installing in cabinet
Used when installing on wire rack
Your Undersink Organizer should include the following parts. Please inspect box contents to ensure
you have received all components.
If you are missing any parts, need assistance with assembl
y
or have questions, please contact
Customer Service. Parts can also be requested online at our customer center