Owner's Manual

A (1)
STEP 4
Place SHELF (A) on its side and slide (4) BOTTOM POLES
(C) through the 4 corner cylinders in SHELF (A). Make
sure SHELF (A) corner cylinders are positioned over
SLIP SLEEVES (G).
Stand the unit upright.
• Use a rubber mallet, if needed, to secure SHELF (A).
• For convenience, place BOTTOM POLES (C) with
Locking Casters on the long side of the shelf if the
rack will be pushed against a wall OR if the rack is
frequently rolled around like a cart place BOTTOM
POLES (C) with Locking Casters on the side being
pushed or pulled.
A
C
G
Repeat STEP 2 & 3 to place another SHELF (A) at
the desired position of BOTTOM POLES (C).
Note: Use a rubber mallet, if needed, to secure
SHELVES (A).
A
C
ASSEMBLY INSTRUCTIONS
STEP 3
G (8)
A (1)
logo on corner cylinders should be right-side up).
Note:
• The level side of SHELF (A) is the TOP side (the
3