Owner`s manual

STEP 11 – Interior Light Bulb and Lens Installation

Open the lid of the grill and locate the light housing c on the back interior wall. Insert the halogen

bulb A into the 2-sockets in the bottom of the interior light assembly. BE CAREFUL NOT TO

TOUCH THE GLASS OF THE BULB AS SKIN OILS WILL REDUCE THE LIFE OF

THE BULB.

Bulb Replacement Information: The Rec Tec Grill uses a 120V, 50W halogen bulb with a GY6.35 base.

This bulb is available in most hardware stores.

After installing the bulb, snap the clear lens b into the face of the light assembly c. The notch in

the lens should be facing down.

Congratulations! Your Rec Tec Grill is now completely assembled and ready for use. Please read

BEFORE THE FIRST USE on the following page before operation.

Do not touch the

glass part of the

halogen bulb as it will

reduce bulb life.

SNAP LENS INTO

HOUSING, WITH

NOTCH DOWN

2-PRONG

HALOGEN

BULB

CLEAR

LENS

INTERIOR

LIGHT

ASSEMBLY