Owner`s manual

Assemble Your Rec Tec Grill

STEP 1 – Unpack and Prepare for Assembly

Remove and discard the 4 rubber bumpers from the grill lid and lid stopper.

These are for shipping

protection only. Remove all items from inside grill body and lay grill body on its back, with chrome towel

loop facing up. For ease of assembly, complete steps 1-5 below before standing grill upright.

STEP 2 – Attach Legs

Attach legs with fixed wheels 5 on the left side, with wheels facing outward. Attach legs with the

rotating casters 4 on the right side of the grill. All four legs attach using 8 long bolts (M10 x 40),

flat washers, lock washers and nuts. (See Bolt Assembly Order diagram)

STEP 3 – Attach Bottom Shelf

Align shelf 8 between grill legs and attach using 4 long (M10 x 40) bolts, flat washers, lock washers

and nuts.

STEP 4 – Attach Side Shelf

Attach shelf 9 to grill body with 4 short (M10 x 16) bolts, flat washers, lock washers and nuts.