Operation Manual

To conrm the ProBOOSTER is properly tted to your vehicle:

1. Firmly push the child restraint

system into the vehicle seat

cushion and toward the vehicle

seat back.

Both the seat base and seat

back of the child restraint should

t as close to the vehicle seat

as possible.

2. If there are large gaps to the

vehicle seat as shown, you

can move the recline bar to the

recline position (at against the

child restraint seat back).

3. The recline bar will close the

gaps to the vehicle seat and

allow the child restraint to be

properly tted to the vehicle for

optimum safety.

4. There should be a minimal

amount of gap between the

child restraint system and the

vehicle seat.

NOTE: You many need to adjust or remove the vehicle’s head

restraint to allow the ProBOOSTER to t properly against the

vehicle’s seat back. Refer to your vehicle’s owners manual for

information on how to operate this feature.