Operation Manual

30
31
ProBOOSTER Trim Cover Installation
1. Carefully position the head restraint
cover onto the head restraint frame/
foam.
2. Hook the 2 elastic loops on the head
restraint cover to head restraint
frame hooks located behind the
3-point belt guides.
3. Hook the 2 elastic loops located
in the lowest corners of the head
restraint cover to the hooks located
on the back of the backrest frame
near the base of the seat.
4. Position the head restraint into the
highest position and then carefully
position the backrest cover over the
upper most points of the backrest
frame/foam and slide the cover
down until reaches the base of the
backrest frame.
5. Hook the button holes located in top/
back of the backrest cover onto the
hooks in the backrest frame.
1
2
3
4
5