Operation Manual

32
33
6. Hook the 2 elastic loops located in
the lowest corners of the backrest
cover to same hooks used to attach
the bottom of the head restraint
cover.
7. Place seat cushion foam on the
seat frame.
8. Position the seat cushion cover
over the armrests of the cushion
frame and then slide the 2 openings
behind the 2-point belt guides
starting at the bottom/front of the
guides and working your way up
and around each guide.
9. Position the rear-most edge of the
seat cushion foam into the pocket
sewn into the cushion cover and
then hook the 2 elastic loops to the
hooks located on the back side of
the cushion frame.
10. Hook the 2 elastic loops located
behind the armrests onto the same
hooks of the cushion frame.
11. Pull the front edge of the cushion
cover down, and around the front of
the cushion frame.
6
7
8
10
9
11