Instruction Manual Cordless Hedge Trimmer HTLI-10 For correct usage, read these instructions carefully and keep in a safe place for future reference. Driven By Solar Inc., Mississauga, ON, L5N 5Z2 www.RechargeTools.
Intended Use This cordless hedge trimmer is designed exclusively for cutting garden hedges in your private domestic gardens. Use for purposes other than those intended qualify as improper use.The manufacturer / supplier is not responsible for any damages that result from improper use, The operator is solely responsible for assuming all risks. Do not overload the machine as it works better and more safely when operated within the specified range of performance.
Safety Precautions Explanation of symbols: Warning notice. Read the instruction manual. Eye protection must be used. Do not expose the tool to rain. Warning! Keep bystanders away. Remove battery before adjusting or cleaning and before leaving the machine unattended for any period. Only use the battery charger indoors. Battery charger contains a safety transformer WARNING! Before cleaning the blades, make sure the machine is first switched off.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury. The user is responsible for any accidents involving other people or anyone‟s property. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your battery operated (cordless) hedge trimmer.
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full-face shield when needed. We recommend the use of a Wide Vision Safety Mask for use over glasses or standard glasses with side shields. Always wear eye protection which conforms to ANSI Z87.1.
Whenever leaving the tool unattended. Before clearing a blockage. Before checking, cleaning or working on the unit. After striking a foreign object. Whenever the tool starts vibrating abnormally. Always ensure that the ventilation openings are kept clear from debris. Battery / Battery charger safety warnings To prevent the risk of electric shock, protect the battery charger from rain and moisture. Recharge the battery only with the charger provided.
No load speed Blade Length Cutting length Tooth spacing: Max cutting capacity Noise power level LWA Noise pressure level LPA Vibration on front handle Vibration on rear handle Charger (adaptor) input Battery Charging time 1100rpm 525mm (20.6”) 508mm (20”) 15 mm (0.60”) 12mm (0.47”) 83.4 dB (A) 63.4dB (A) 0.955m/s2 1.12m/s2 AC110V,60Hz 1 hour Before Use Caution! The charger must only be operated in dry rooms Only use the battery charger indoors.
Charging Procedure (Fig. 1,2,3,4) Battery can be charged outside the machine (Fig.1) or on the machine (Fig 2-3). It is recommended to charge the battery pack outside the machine, If charging on the machine, the switch will lose function and machine cannot be started during charging process. 1. Open the rubber cover to see charging inlet (16) on the battery pack. (Fig.4) 2. Insert the charger cable into charging inlet (16). (Fig.3) 3.
Attach the front handle to the main housing as illustrated in Fig.7, Make sure the lock spanner (10) is at the right side before attaching the front handle otherwise the front handle cannot be aligned with the housing. (Fig.7) Check to confirm the front handle is firmly secured. If not, retighten the locking bolt (9). Adjust the front handle to the required position and close the lock spanner (10). Fig. 7 2.
2.Adjustment of the front handle (Fig.12-13) The front handle can be set in three positions. Release the lock spanner to adjust the front handle to the most comfortable position. Then close the lock spanner to lock it in that position. Caution: Ensure you support the weight of the hedge trimmer before you adjust the front handle. Fig.12 Fig.13 Starting and Stopping 1. Starting and Stopping (Fig.14) Before starting your hedge trimmer, REMOVE blade guard from blade.
Operating Instructions This cordless hedge trimmer is designed exclusively for cutting garden hedges in your private domestic gardens. Please note that this tool is not designed for commercial, trade or industrial use. Only use this product for the purpose specified in these instructions. Any other use will void the guarantee.
Maintenance Blades can cause injury. Remove battery from the machine during maintenance work. Note: To ensure long and reliable service, regularly carry out the following maintenance: Check for obvious defects such as loose, dislodged or damaged blades, loose fittings and worn or damaged components. Check that covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs before using.
During storage, charge the battery at least once every three months to protect it from damage. Store the machine in a dry, secure place out of reach of children. Do not place any other objects on top of the machine. The machine must not be stored over 35ºC (95ºF)or under direct exposure to sunlight. Do not store the machine in places with static electricity. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
This guarantee does not extend to normal wear and tear on blades or blade mounting components. Any guarantee claim shall be immediately void in the event of unauthorized repairs. Faults and defects which can be traced to material or manufacturing faults will be rectified exclusively by our contracted service agents (the seller has the right to remedy a defect) in your vicinity or by the manufacturer if the latter is closer. Any claims going beyond the provision of a guarantee are ruled out.