SDS

Multi-Purpose Sealer
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 -
United Kingdom (UK)
SECTION 7: Handling and storage
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and
well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly
closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright
to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental
contamination.
7.3 Specific end use(s)
Recommendations
:
:
Industrial sector specific
solutions
Not available.
Not available.
Product/ingredient name
Exposure limit values
Recommended monitoring
procedures
Occupational exposure limits
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to monitoring standards, such as
the following: European Standard EN 689 (Workplace atmospheres - Guidance for
the assessment of exposure by inhalation to chemical agents for comparison with
limit values and measurement strategy) European Standard EN 14042 (Workplace
atmospheres - Guide for the application and use of procedures for the assessment of
exposure to chemical and biological agents) European Standard EN 482
(Workplace atmospheres - General requirements for the performance of procedures
for the measurement of chemical agents) Reference to national guidance
documents for methods for the determination of hazardous substances will also be
required.
:
Appropriate engineering
controls
:
Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and
safety showers are close to the workstation location.
8.2 Exposure controls
Hygiene measures
:
No DNELs/DMELs available.
PNECs
No PNECs available.
SECTION 8: Exposure controls/personal protection
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
8.1 Control parameters
DNELs/DMELs
Individual protection measures
Silicon dioxide
EH40/2005 WELs (United Kingdom (UK), 12/2011).
TWA: 6 mg/m³ 8 hours. Form: inhalable dust
TWA: 2.4 mg/m³ 8 hours. Form: respirable dust
5/11