SDS

Multi-Purpose Sealer
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 453/2010 -
United Kingdom (UK)
SECTION 8: Exposure controls/personal protection
Hand protection
Use a properly fitted, air-purifying or supplied air respirator complying with an
approved standard if a risk assessment indicates this is necessary. Respirator
selection must be based on known or anticipated exposure levels, the hazards of the
product and the safe working limits of the selected respirator.
Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts. If contact is possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: safety glasses with side-shields.
Eye/face protection
Respiratory protection
:
:
:
Skin protection
Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product.
:
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Body protection
:
Other skin protection
Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
>100°C
Physical state
Melting point/freezing point
Initial boiling point and boiling
range
Vapor pressure
Relative density
Vapor density
Solubility(ies)
Liquid.
Not available.
1.072
Not available.
Not available.
Soluble in the following materials: cold water and hot water.
Amine. [Slight]
Odor
pH
White translucent.
Color
Evaporation rate
Not available.
Flash point
Closed cup: >100°C
Open cup: >100°C
Not available.
Not available.
8.4
Not available.
Odor threshold
Partition coefficient: n-octanol/
water
Upper/lower flammability or
explosive limits
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
9.1 Information on basic physical and chemical properties
Appearance
Burning time
Not applicable.
Burning rate
Not applicable.
:
:
SECTION 9: Physical and chemical properties
Flammability (solid, gas)
:
Not available.
Solubility in water
:
Not available.
6/11