Datasheet

ManualsBrandsRECOM ManualsPSU Components1 W DC/DC Converter 5 Vdc 5 Vdc 200 mA 1 W

www.recom-power.com

REV.: 5/2018 ECO-1

Description

The RxxPxxS_D Series of DC/DC Converters are certiﬁed to UL/CSA60950-1. This makes them ideal for

safety applications where approved or reinforced isolation is required. The reinforced versions are also

EN61010-1 certiﬁed for Lab Equipment Safety.

DC/DC Converter

1 Watt

SIP7

Single and Dual

Output

E314885

EN/IEC60950-1 certiﬁed

EN/IEC60601-1 certiﬁed

UL/CSA 60950-1 certiﬁed

ES/CSA60601-1 certiﬁed

EN/IEC61010-1 certiﬁed

IEC-60601-1 CB report

www.recom-power.com/eval-ref-boards www.recom-power.com/bier

RxxPxx/R

Features

Unregulated

Converters

• Qualiﬁed with 65kV/µs @ Vcommon mode =1KV

• EN61010 for test, measurement and lab use

• EN60601 for medical applications

• Reinforced isolation 6.4kVDC or 8kVDC

• Optional continuous short circuit protection

• Unique reinforced isolation transformer system

• /X2 option for >9mm input/output clearance

Selection Guide

Part nom. Input Output Output Efﬁciency max. Capacitive

Number Voltage Voltage Current typ.

(1)

Load

(2)

[VDC] [VDC] [mA] [%] [µF]

RxxP3.3S/R

(3,4,5)

5, 12, 15, 24 3.3 303 70 - 80 2200

RxxP05S/R

(3,4,5)

5, 12, 15, 24 5 200 75 - 80 1000

RxxP09S/R

(3,4,5)

5, 12, 15, 24 9 111 75 - 82 1000

RxxP12S/R

(3,4,5)

5, 12, 15, 24 12 84 75 - 82 470

RxxP15S/R

(3,4,5)

5, 12, 15, 24 15 66 75 - 83 470

RxxP3.3D/R

(3,4,5)

5, 12, 15, 24 ±3.3 ±151 72 - 79 ±1000

RxxP05D/R

(3,4,5)

5, 12, 15, 24 ±5 ±100 75 - 82 ±470

RxxP09D/R

(3,4,5)

5, 12, 15, 24 ±9 ±55 75 - 82 ±470

RxxP12D/R

(3,4,5)

5, 12, 15, 24 ±12 ±41 75 - 82 ±220

RxxP15D/R

(3,4,5)

5, 12, 15, 24 ±15 ±33 75 - 83 ±220

Notes:

Note3: add sufﬁx „/R6.4“ for 6.4kVDC/1second isolation or „/R8“ for 8kVDC/1second isolation

Note4: add sufﬁx „/X2“ for single output with alternative pinout

Note5: add sufﬁx „/P“ for continous short circuit protection

Model Numbering

Ordering Examples:

R05P3.3S/R8/P = 5V Input, 3.3V Output, Single Output, 8kVDC/1s isolation, Continous Short Circuit Protection

R24P05S/R6.4/P/X2 = 24V Input, 5V Output, Single Output, 6.4kVDC/1s isolation, Continous SCP, Alternative Pinout

R12P05D/R8/X2 = ±12V Input, ±5V Output, Dual Output, 8kVDC/1s isolation, Alternative Pinout

Reinforced Isolation

(3)

Pinout

(4)

Protection

(5)

Input Voltage

Output Voltage

Single or Dual

R__P__ _/P/X2/R

Notes:

Note1: Efﬁciency is tested at nominal input and full load at +25°C ambient

Note2: Max. Capacitive Load is deﬁned as the capacitive load that will allow start up

in under 1 second without damage to the converter

Summary of content (6 pages)

PAGE 1
Features Unregulated Converters • • • • • • • Qualified with 65kV/µs @ Vcommon mode =1KV EN61010 for test, measurement and lab use EN60601 for medical applications Reinforced isolation 6.4kVDC or 8kVDC Optional continuous short circuit protection Unique reinforced isolation transformer system /X2 option for >9mm input/output clearance Description The RxxPxxS_D Series of DC/DC Converters are certified to UL/CSA60950-1.
PAGE 2
RxxPxx/R DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Input Voltage Range Max. ±10% 0% Minimum Load (5) Internal Operating Frequency 20kHz Output Ripple and Noise 50kHz 85kHz 20MHz BW 200mVp-p Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met Efficiency vs. Load PxxP05D/R6.
PAGE 3
RxxPxx/R DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Deviation vs. Load PxxP05D/R6.4 and PxxP09D/R8 25 20 20 15 15 Deviation [%] Deviation [%] PxxP05S/R6.4 and PxxP09S/R8 25 10 5 0 -5 -15 0 10 20 30 40 5 0 -5 R05P05S/R6.4 R12P05S/R6.4 R24P05S/R6.4 -10 10 R05P05D/R6.4 R12P05D/R6.4 R24P05D/R6.
PAGE 4
RxxPxx/R DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom.
PAGE 5
RxxPxx/R DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) EMC Filtering Suggestions according to EN55032 Class A and Class B Class A Class B C2 C2 C3 C3 L1 L1 +VIN+VIN +VOUT +VOUT +VIN+VIN C1 C1 +VOUT +VOUT C1 C1 -VIN-VIN -VOUT -VOUT C2 C2 -VIN-VIN Component List Class A -VOUT -VOUT Component List Class B Model C1 C2 Model C1 RxxPxx/R6.4 10µF 2n2F 8kV Vishay HGZ222MBP RxxPxx/R6.
PAGE 6
RxxPxx/R DC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 520.0 x 22.3 x 12.0mm Packaging Quantity tube 25pcs Storage Temperature Range -55°C to +125°C Storage Humidity 95% RH max. The product information and specifications may be subject to changes even without prior written notice.