Datasheet

Efficiency at Full Load See Selection Guide
Minimum Load = 0% Specifications valid for 10% minimum load only.
Isolation Voltage (tested for 1 second) 1000VDC
(rated for 1 minute***) 500VAC / 60Hz
Isolation Voltage H-Suffix (tested for 1 second) 3000VDC
H-Suffix (rated for 1 minute***) 1500VAC / 60Hz
Isolation Capacitance R1S, R1S8, R1D, R1D10 15pF min. / 70pF max.
R1S12, R1D12 10pF min. / 75pF max.
Isolation Resistance 10 GΩ min.
Short Circuit Protection 1 Second
P-Suffix Continuous
Operating Temperature Range (free air convection) -40°C to +100°C (see Graph)
Storage Temperature Range -55°C to +125°C
Reflow Temperature ROHS compliant 245°C (30 sec), Peak 255°C (5 sec) max.
Vapor Phase Process (for more details see Application Notes) 230°C (90 sec) max.
Relative Humidity 95% RH
Humidity Susceptibility Test 1000 hrs / 90% humidity / +85°C ambient
Package weight R1S 1.0g
R1S8 1.1g
R1S12, R1D, R1D10, R1D12 1.2g
Packing Quantity R1S, R1S8 40 pcs per Tube
R1S12, R1D, R1D10, R1D12 33 pcs per tube
All Types 500 pcs per Reel
MTBF (+25°C) using MIL-HDBK 217F 4275 x 10
3
hours
(+85°C) using MIL-HDBK 217F 1365 x 10
3
hours
Certifications
CB Test Report Report: US/14402A/UL IEC 60950-1:2001 1st Ed.
UL General Safety Report: E358085 UL 60950-1 2nd Ed.
CUL General Safety C22.2 No. 60950-1-03
EN Medical Safety Report: MDD1205098-2 + RM1205098-2 IEC/EN 60601-1 3rd Edition
Medical Report + ISO14971 Risk Assessment
EN General Safety Report: SPCLVD1211033-3 EN60950-1: 2006 + A12:2011
Conducted / Radiated Emissions EN55022 Level A
R1S_R1D
Series
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
ECONOLINE
DC/DC-Converter
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60%
80%
20%
20
60
80
Total Output current (%)
3.305
0505
1205
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60%
80%
20%
-5.000
Total Output current (%)
0505
0.000
5.000
10.000
15.000
20.000
25.000
3.305
1205
R1S**-xx05
}
Detailed Information see
Application Notes chapter "MTBF"
Typical Characteristics
+10%
+5%
V Nom.
+5%
 1%
10% 50% 100%
Output Voltage
Output Load Current (%)
 5%
Typical Load Line
R1S-R1D
Tolerance Envelope
Efficiency %
100
0
40%0% 100%
40
Efficiency / Load
60%
80%
20%
20
60
80
Total Output current (%)
3.305
0505
1205
Deviation / Load
-10.000
40%0% 100%
Deviation from Nominal (%)
60%
80%
20%
-5.000
Total Output current (%)
0505
0.000
5.000
10.000
15.000
20.000
25.000
3.305
1205
R1D**-xx05
***Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer to our Application Notes.
Notes
Note 1: Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.
REV: 1/2016 E-25www.recom-power.com