Datasheet

R2S-R2D
Refer to Application Notes
ECONOLINE
DC/DC-Converter
with 3 year Warranty
Selection Guide
Part Input Output Output Efficiency Max
Number Voltage Voltage Current Capacitive
SMD (3kV) (VDC) (VDC) (mA) (%) Load
(1)
R2S**-xx3.3 (H) 5, 12, 15, 24 3.3 606 70-75 3300µF
R2S**-xx05 (H) 5, 12, 15, 24 5 400 76-84 1200µF
R2S**-xx09 (H) 5, 12, 15, 24 9 222 76-84 1200µF
R2S**-xx12 (H) 5, 12, 15, 24 12 167 76-85 680µF
R2S**-xx15 (H) 5, 12, 15, 24 15 133 76-85 680µF
R2S**-xx24 (H) 5, 12, 15, 24 24 83 76-85 220µF
R2D**-xx05 (H) 5, 12, 15, 24 ±5 ±200 75-80 ±470µF
R2D**-xx09 (H) 5, 12, 15, 24 ±9 ±111 75-80 ±470µF
R2D**-xx12 (H) 5, 12, 15, 24 ±12 ±83 75-83 ±330µF
R2D**-xx15 (H) 5, 12, 15, 24 ±15 ±66 75-85 ±330µF
R2D**-xx24 (H) 5, 12, 15, 24 ±24 ±42 75-85 ±330µF
xx = Input Voltage. Other input and output voltage combinations available on request.
* add Suffix “P” for Continuous Short Circuit Protection, e.g. R2S-0505/P, R2D-0505/HP
* add suffix -R for tape&reel packing e.g. R2S-0505-R. For more details see Tapes Section.
Input Voltage Range ±10%
Output Voltage Accuracy ±5%
Line Voltage Regulation 1.2%/1% of Vin max.
Load Voltage Regulation 3.3V output types 20% max.
(10% to 100% full load) 5V output type 15% max.
9V, 12V, 15V, 24V output types 10% max.
Output Ripple and Noise (20MHz limited) 150mVp-p max.
Operating Frequency 20kHz min. / 40kHz typ. / 85kHz max.
Efficiency at Full Load 70% min. / 80% typ.
Minimum Load = 0% Specifications valid for 10% minimum load only.
continued on next page
2 Watt
SMD Single
&
Dual Output
Features
Unregulated
Converters
Description
Specifications (measured at T
A
= 25°C, nominal input voltage, full load and after warm-up)
The R2S and R2D converters are of the enclosed open frame type, meaning that they are
un-potted. The converters are typically used in general purpose and industrial low power
isolation and voltage matching applications where an SMD converter is required.
The converter series feature an extended ambient temperature operating range of
-40°C to +100°C without derating and optional continuous short circuit protection.
In addition to two isolation options and three different case formats, the converters are also
available prepacked as tape and reel for use with automatic insertion machines.
R2S** : ** without marking denotes 5 pins out of 8 fitted (/H option available)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (/H option available)
R2D** : ** without marking denotes 6 pins out of 10 fitted (/H option available)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
** with marking 12 denotes with 10 pins out of 12 fitted (/H option available)
Case and Pinning Options (note restrictions on /H option)
E358085
UL-60950-1 Certified
EN-60950-1 Certified
EN-60601-1 Certified*
(*/H suffix)
●
Fully RoHS 6/6 Conform
●
Full Power at 100°C Ambient Temperature
●
1kVDC and 3kVDC Isolation Options
●
/H Version Certified for Medical Applications
●
UL/EN/CSA Certified, CB Report
●
Suitable for Fully Automated Assembly
(including Vapor Phase Soldering)
●
Optional Continuous Short Circuit Protection
●
Efficiency to 85%
●
Built-In EN55022 Class A Filter
RoHS
2011/65/EU
6/6
Output Power (%)
100
60
20
40
105
500-40 150
Operating Temperature °C
0
80
Safe Operating Area
100
Derating-Graph
(Ambient Temperature)
***Any data referred to in this datasheet are of indicative nature
and based on our practical experience only. For further details,
please refer to our Application Notes.
REV: 0/2015 E-85www.recom-power.com