Datasheet

ManualsBrandsRecom ManualsLED DriversLED Driver 3W 700mA 6V IP66

Features

LED

Driver

• 3W Class II AC-DC LED power supply

• 350mA, 500mA and 700mA CC/CV output

• Fused input and SCP, OVP, OLP, OTP

• 3kVAC isolation

• IP66 rated

• Low cost

RACD03

AC/DC Converter

Description

A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6

high power LEDs. The output (dual constant voltage / constant current mode) current limit is ﬁxed at

350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. Connections are via

118mm long ﬂying leads.

E340696

3 Watt

CC/CV

Single Output

UL8750 certiﬁed

UL1310 certiﬁed

CAN/CSA-C22.2 No. 223-M91 certiﬁed

IEC/EN61347 certiﬁed

IEC/EN61347-2-13 certiﬁed

ENEC certiﬁed

CB report

www.recom-power.com

REV.: 3/2019 L-1

Selection Guide

Part Input CC CV

(1)

Efﬁciency Rated

Number Voltage Range Mode Mode typ. Power nom./max.

[VAC] [VDC] [mA] [VDC] [mA] [%] [W]

RACD03-350 90-264 3-12 350 15 0-300 72 3 / 4.2

RACD03-500 90-264 3-9.5 500 none 71 3 / 4.6

RACD03-700 90-264 3-4.5 700 6 0-600 62 3 / 3.1

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range

90VAC 230VAC 264VAC

120VDC 370VDC

Input Current full load, 100VAC 110mA

Inrush Current 230VAC, <2ms 10A

Input Frequency Range 47Hz 63Hz

Power Factor full load, 230VAC 0.55

Hold-up Time 18ms

Output Ripple Current 100mAp-p

continued on next page

Speciﬁcations (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated)

All LED Drivers may not be used without a load. They must be switched on the primary side only.

Noncompliance may damage the LED or reduce its lifetime.

Model Numbering

nom. Output Power

RACD03-___

nom. Output Current

Summary of content (4 pages)

PAGE 1
Features LED Driver • • • • • • 3W Class II AC-DC LED power supply 350mA, 500mA and 700mA CC/CV output Fused input and SCP, OVP, OLP, OTP 3kVAC isolation IP66 rated Low cost AC/DC Converter RACD03 Description A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6 high power LEDs. The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower output currents, the output is constant voltage.
PAGE 2
RACD03 AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) Constant Current (CC) and Constant Voltage (CV) (1) CV 15V RACD03-350 RACD03-500 RACD03-700 Output Voltage 12V 9.5V CV 6V 4.
PAGE 3
RACD03 AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) Derating Graph 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -20 -10 0 10 20 30 40 50 60 Ambient Temperature [°C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report Number Standard for LED Equipment for use in Lighting Products Standard for Class 2 Power Units E340696-1-4 UL1310, 6th Edition, 2011 CAN/CSA-C22.2 No.
PAGE 4
RACD03 AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin, rated load and after warm-up unless otherwise stated) DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material case PCB potting plastic (UL94V-2) plastic resin with fibreglass (UL94V-0) silicone (UL94V-0) Dimension (LxWxH) 52.1 x 29.6 x 23.1mm Weight 45g Dimensions Drawing (mm) 215 +10 -20 10±1 SEC 3 4 Wired Connection double insulation Ø3.0 PRI 215 6±1 tc +10 -20 4.