Datasheet

SAFETY AND CERTIFICATIONS
Certificate Type (Safety)
Condition
Standard
UL General Safety E196683
UL60950-1 1st Ed.: 2003
C22.2 No. 60950 1st. Ed.: 2003
EMC Compliance Condition Standard / Criterion
EMI Standard
(10)
with external filter EN55022, Class A or B
ESD
Radiated Immunity
Fast Transient
(11)
Surge
(11)
Conducted Immunity
Air ±8kV and Contact ±6kC
10 V/m
±2kV
±2kV
10 Vr.m.s
EN61000-4-2, Criteria A
EN61000-4-3, Criteria A
EN61000-4-4, Criteria A
EN61000-4-5, Criteria A
EN61000-4-6, Criteria A
continued on next page
DC/DC Converter
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted
RP20-AW
Series
PD-5
REV.: 1/2016www.recom-power.com
ENVIRONMENTAL
Parameter Condition
Value
Operating Temperature Range
without derating
with derating
-40°C to +68°C
-40°C to +101°C
Maximum Case Temperature +105°C
Temperature Coefficient ±0.02%/°C max.
Thermal Impedance
Natural convection
Natural convection with Heat Sink
17.6°C/Watt
14.8°C/Watt
Operating Humidity 5% - 95% RH
Thermal Shock MIL-STD-810F
Vibration MIL-STD-810F
MTBF
(8)
Bellcore TR-NWT-000332
MIL-HDBK-217F
1766 x 10
3
hours
1469 x 10
3
hours
-40 60 80
9468
100
101
12040
200-20
0
20
10
40
60
80
100
Ambient Temperature [°C]
Output Power [%]
-40 60 80
9773
101 12040
200-20
0
20
10
40
60
80
100
Ambient Temperature [°C]
Output Power [%]
Derating Graph
(9)
Notes:
Note8: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C.
MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground, Benign, controlled environment).
Note9: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-
number not shown here please contact our technical support service at [e-mail].
RP20-4815SAW RP20-4815SAW with Heat-sink
Notes:
Note10: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below.
Note11: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom
suggests: Nippon chemi-con KY series, 220µF/100V.